Diff: rfc9944v3.txt - rfc9944.txt

	rfc9944v3.txt	rfc9944.txt

	skipping to change at line 231 ¶	skipping to change at line 231 ¶
	+-----------------------------------+	+-----------------------------------+

	Figure 1: Basic Architecture - Non-IP Example	Figure 1: Basic Architecture - Non-IP Example

	In Figure 1, the onboarding application (app) provides the device	In Figure 1, the onboarding application (app) provides the device
	particulars, which will vary based on the type of device, as	particulars, which will vary based on the type of device, as
	indicated by the selection of schema extensions. As part of the	indicated by the selection of schema extensions. As part of the
	response, the SCIM server might provide additional information,	response, the SCIM server might provide additional information,
	especially in the case of non-IP devices, where an application-layer	especially in the case of non-IP devices, where an application-layer
	gateway may need to be used to communicate with the device (c.f.,	gateway may need to be used to communicate with the device (c.f.,

	[NIPC-API]). The control endpoint is one among a number of objects	[NIPC]). The control endpoint is one among a number of objects that
	that may be returned. That control endpoint will then communicate	may be returned. That control endpoint will then communicate with
	with the Application Layer Gateway (ALG) to reach the device.	the Application Layer Gateway (ALG) to reach the device.

	+------------------------------------+	+------------------------------------+
	\| \|	\| \|
	+-----------+ Request \| +---------+ +----+ +------+ \|	+-----------+ Request \| +---------+ +----+ +------+ \|
	\| Onboarding\|------------->\| SCIM \|-->\| AAA\|<-->\|Switch\| \|	\| Onboarding\|------------->\| SCIM \|-->\| AAA\|<-->\|Switch\| \|
	\| App \|<-------------\| Server \| +----+ +------+ \|	\| App \|<-------------\| Server \| +----+ +------+ \|
	+-----------+ Ctrl Endpt +---------+ \| \|	+-----------+ Ctrl Endpt +---------+ \| \|
	\| \| \|	\| \| \|
	+-----------+ \| +------------+ +-------+ \|	+-----------+ \| +------------+ +-------+ \|
	\| Control \|...........\|..\| Router/fw \|.........\|Device \| \|	\| Control \|...........\|..\| Router/fw \|.........\|Device \| \|

	skipping to change at line 733 ¶	skipping to change at line 733 ¶

	<CODE BEGINS>	<CODE BEGINS>
	{	{
	"schemas": ["urn:ietf:params:scim:schemas:core:2.0:Device",	"schemas": ["urn:ietf:params:scim:schemas:core:2.0:Device",
	"urn:ietf:params:scim:schemas:extension:ble:2.0:Device"],	"urn:ietf:params:scim:schemas:extension:ble:2.0:Device"],

	"id": "e9e30dba-f08f-4109-8486-d5c6a3316111",	"id": "e9e30dba-f08f-4109-8486-d5c6a3316111",
	"displayName": "BLE Heart Monitor",	"displayName": "BLE Heart Monitor",
	"active": true,	"active": true,
	"urn:ietf:params:scim:schemas:extension:ble:2.0:Device" : {	"urn:ietf:params:scim:schemas:extension:ble:2.0:Device" : {

	"versionSupport": ["5.3"],	"versionSupport": ["5.4"],
	"deviceMacAddress": "2C:54:91:88:C9:E2",	"deviceMacAddress": "2C:54:91:88:C9:E2",
	"isRandom": false,	"isRandom": false,
	"separateBroadcastAddress": ["AA:BB:88:77:22:11", "AA:BB:88:77:\	"separateBroadcastAddress": ["AA:BB:88:77:22:11", "AA:BB:88:77:\
	22:12"],	22:12"],
	"mobility": true,	"mobility": true,
	"pairingMethods": ["urn:ietf:params:scim:schemas:extension:\	"pairingMethods": ["urn:ietf:params:scim:schemas:extension:\
	pairingPassKey:2.0:Device"],	pairingPassKey:2.0:Device"],
	"urn:ietf:params:scim:schemas:extension:pairingPassKey:2.0:\	"urn:ietf:params:scim:schemas:extension:pairingPassKey:2.0:\
	Device" : {	Device" : {
	"key": 123456	"key": 123456

	skipping to change at line 773 ¶	skipping to change at line 773 ¶

	<CODE BEGINS>	<CODE BEGINS>
	{	{
	"schemas": ["urn:ietf:params:scim:schemas:core:2.0:Device",	"schemas": ["urn:ietf:params:scim:schemas:core:2.0:Device",
	"urn:ietf:params:scim:schemas:extension:ble:2.0:Device"],	"urn:ietf:params:scim:schemas:extension:ble:2.0:Device"],

	"id": "e9e30dba-f08f-4109-8486-d5c6a3316111",	"id": "e9e30dba-f08f-4109-8486-d5c6a3316111",
	"displayName": "BLE Heart Monitor",	"displayName": "BLE Heart Monitor",
	"active": true,	"active": true,
	"urn:ietf:params:scim:schemas:extension:ble:2.0:Device" : {	"urn:ietf:params:scim:schemas:extension:ble:2.0:Device" : {

	"versionSupport": ["5.3"],	"versionSupport": ["5.4"],
	"deviceMacAddress": "2C:54:91:88:C9:E2",	"deviceMacAddress": "2C:54:91:88:C9:E2",
	"isRandom": false,	"isRandom": false,
	"separateBroadcastAddress": ["AA:BB:88:77:22:11", "AA:BB:88:77:\	"separateBroadcastAddress": ["AA:BB:88:77:22:11", "AA:BB:88:77:\
	22:12"],	22:12"],
	"mobility": true,	"mobility": true,
	"pairingMethods": ["urn:ietf:params:scim:schemas:extension:\	"pairingMethods": ["urn:ietf:params:scim:schemas:extension:\
	pairingOOB:2.0:Device"],	pairingOOB:2.0:Device"],
	"urn:ietf:params:scim:schemas:extension:pairingOOB:2.0:Device": {	"urn:ietf:params:scim:schemas:extension:pairingOOB:2.0:Device": {
	"key": "TheKeyvalueRetrievedFromOOB",	"key": "TheKeyvalueRetrievedFromOOB",
	"randomNumber": 238796813516896	"randomNumber": 238796813516896

	skipping to change at line 813 ¶	skipping to change at line 813 ¶

	<CODE BEGINS>	<CODE BEGINS>
	{	{
	"schemas": ["urn:ietf:params:scim:schemas:core:2.0:Device",	"schemas": ["urn:ietf:params:scim:schemas:core:2.0:Device",
	"urn:ietf:params:scim:schemas:extension:ble:2.0:Device"],	"urn:ietf:params:scim:schemas:extension:ble:2.0:Device"],

	"id": "e9e30dba-f08f-4109-8486-d5c6a3316111",	"id": "e9e30dba-f08f-4109-8486-d5c6a3316111",
	"displayName": "BLE Heart Monitor",	"displayName": "BLE Heart Monitor",
	"active": true,	"active": true,
	"urn:ietf:params:scim:schemas:extension:ble:2.0:Device" : {	"urn:ietf:params:scim:schemas:extension:ble:2.0:Device" : {

	"versionSupport": ["5.3"],	"versionSupport": ["5.4"],
	"deviceMacAddress": "2C:54:91:88:C9:E2",	"deviceMacAddress": "2C:54:91:88:C9:E2",
	"isRandom": false,	"isRandom": false,
	"separateBroadcastAddress": ["AA:BB:88:77:22:11", "AA:BB:88:77:\	"separateBroadcastAddress": ["AA:BB:88:77:22:11", "AA:BB:88:77:\
	22:12"],	22:12"],
	"mobility": true,	"mobility": true,
	"pairingMethods": ["urn:ietf:params:scim:schemas:extension:\	"pairingMethods": ["urn:ietf:params:scim:schemas:extension:\
	pairingPassKey:2.0:Device",	pairingPassKey:2.0:Device",
	"urn:ietf:params:scim:schemas:extension:pairingOOB:2.0:\	"urn:ietf:params:scim:schemas:extension:pairingOOB:2.0:\
	Device"],	Device"],
	"urn:ietf:params:scim:schemas:extension:pairingPassKey:2.0:\	"urn:ietf:params:scim:schemas:extension:pairingPassKey:2.0:\

	skipping to change at line 1242 ¶	skipping to change at line 1242 ¶
	<CODE BEGINS>	<CODE BEGINS>
	{	{
	"schemas": ["urn:ietf:params:scim:schemas:core:2.0:Device",	"schemas": ["urn:ietf:params:scim:schemas:core:2.0:Device",
	"urn:ietf:params:scim:schemas:extension:ble:2.0:Device",	"urn:ietf:params:scim:schemas:extension:ble:2.0:Device",
	"urn:ietf:params:scim:schemas:extension:endpointAppsExt:2.0:\	"urn:ietf:params:scim:schemas:extension:endpointAppsExt:2.0:\
	Device"],	Device"],
	"id": "e9e30dba-f08f-4109-8486-d5c6a3316111",	"id": "e9e30dba-f08f-4109-8486-d5c6a3316111",
	"displayName": "BLE Heart Monitor",	"displayName": "BLE Heart Monitor",
	"active": true,	"active": true,
	"urn:ietf:params:scim:schemas:extension:ble:2.0:Device" : {	"urn:ietf:params:scim:schemas:extension:ble:2.0:Device" : {

	"versionSupport": ["5.3"],	"versionSupport": ["5.4"],
	"deviceMacAddress": "2C:54:91:88:C9:E2",	"deviceMacAddress": "2C:54:91:88:C9:E2",
	"isRandom": false,	"isRandom": false,
	"separateBroadcastAddress": ["AA:BB:88:77:22:11", "AA:BB:88:77:\	"separateBroadcastAddress": ["AA:BB:88:77:22:11", "AA:BB:88:77:\
	22:12"],	22:12"],
	"mobility": false,	"mobility": false,
	"pairingMethods": [	"pairingMethods": [
	"urn:ietf:params:scim:schemas:extension:pairingPassKey:2.0:\	"urn:ietf:params:scim:schemas:extension:pairingPassKey:2.0:\
	Device"],	Device"],
	"urn:ietf:params:scim:schemas:extension:pairingPassKey:2.0:\	"urn:ietf:params:scim:schemas:extension:pairingPassKey:2.0:\
	Device" : {	Device" : {

	skipping to change at line 1498 ¶	skipping to change at line 1498 ¶

	[Zigbee] Zigbee Alliance, "Zigbee Specification", ZigBee Document	[Zigbee] Zigbee Alliance, "Zigbee Specification", ZigBee Document
	05-3474-21, August 2015, <https://zigbeealliance.org/wp-	05-3474-21, August 2015, <https://zigbeealliance.org/wp-
	content/uploads/2019/11/docs-05-3474-21-0csg-zigbee-	content/uploads/2019/11/docs-05-3474-21-0csg-zigbee-
	specification.pdf>.	specification.pdf>.

	10.2. Informative References	10.2. Informative References

	[JSONSchema]	[JSONSchema]
	Wright, A., Ed., Andrews, H. A., Ed., Hutton, B., Ed., and	Wright, A., Ed., Andrews, H. A., Ed., Hutton, B., Ed., and

	G. Dennis, "JSON Schema- A Media Type for Describing JSON	G. Dennis, "JSON Schema: A Media Type for Describing JSON
	Documents", December 2022,	Documents", December 2022,
	<https://json-schema.org/draft/2020-12/json-schema-core>.	<https://json-schema.org/draft/2020-12/json-schema-core>.

	[NIPC] Brinckman, B., Mohan, R., and B. Sanford, "An Application	[NIPC] Brinckman, B., Mohan, R., and B. Sanford, "An Application

	Layer Interface for Non-IP device control (NIPC)", Work in
	Progress, Internet-Draft, draft-brinckman-nipc-01, 21
	April 2024, <https://datatracker.ietf.org/doc/html/draft-
	brinckman-nipc-01>.

	[NIPC-API] Brinckman, B., Mohan, R., and B. Sanford, "An Application
	Layer Interface for Non-Internet-Connected Physical	Layer Interface for Non-Internet-Connected Physical
	Components (NIPC)", Work in Progress, Internet-Draft,	Components (NIPC)", Work in Progress, Internet-Draft,
	draft-ietf-asdf-nipc-18, 24 February 2026,	draft-ietf-asdf-nipc-18, 24 February 2026,
	<https://datatracker.ietf.org/doc/html/draft-ietf-asdf-	<https://datatracker.ietf.org/doc/html/draft-ietf-asdf-
	nipc-18>.	nipc-18>.


		[OAUTHv2] Hardt, D., Ed., "The OAuth 2.0 Authorization Framework",
		RFC 6749, DOI 10.17487/RFC6749, October 2012,
		<https://www.rfc-editor.org/info/rfc6749>.

	[OpenAPI] Swagger, "OpenAPI Specification", Version 3.1.1, October	[OpenAPI] Swagger, "OpenAPI Specification", Version 3.1.1, October
	2024, <https://swagger.io/specification/>.	2024, <https://swagger.io/specification/>.

	[RFC6241] Enns, R., Ed., Bjorklund, M., Ed., Schoenwaelder, J., Ed.,	[RFC6241] Enns, R., Ed., Bjorklund, M., Ed., Schoenwaelder, J., Ed.,
	and A. Bierman, Ed., "Network Configuration Protocol	and A. Bierman, Ed., "Network Configuration Protocol
	(NETCONF)", RFC 6241, DOI 10.17487/RFC6241, June 2011,	(NETCONF)", RFC 6241, DOI 10.17487/RFC6241, June 2011,
	<https://www.rfc-editor.org/info/rfc6241>.	<https://www.rfc-editor.org/info/rfc6241>.

	[RFC7950] Bjorklund, M., Ed., "The YANG 1.1 Data Modeling Language",	[RFC7950] Bjorklund, M., Ed., "The YANG 1.1 Data Modeling Language",
	RFC 7950, DOI 10.17487/RFC7950, August 2016,	RFC 7950, DOI 10.17487/RFC7950, August 2016,

	skipping to change at line 1873 ¶	skipping to change at line 1871 ¶
	[	[
	{	{
	"id": "urn:ietf:params:scim:schemas:extension:ble:2.0:Device",	"id": "urn:ietf:params:scim:schemas:extension:ble:2.0:Device",
	"name": "bleExtension",	"name": "bleExtension",
	"description": "BLE extension for device account.",	"description": "BLE extension for device account.",
	"attributes" : [	"attributes" : [
	{	{
	"name": "versionSupport",	"name": "versionSupport",
	"type": "string",	"type": "string",
	"description": "Provides a list of all the BLE versions \	"description": "Provides a list of all the BLE versions \

	supported by the device, for example, [4.1, 4.2, 5.0, 5.1, 5.2, 5.3]\	supported by the device, for example, [4.1, 4.2, 5.0, 5.1, 5.2, 5.4]\
	.",	.",
	"multiValued": true,	"multiValued": true,
	"required": true,	"required": true,
	"caseExact": false,	"caseExact": false,
	"mutability": "readWrite",	"mutability": "readWrite",
	"returned": "default",	"returned": "default",
	"uniqueness": "none"	"uniqueness": "none"
	},	},
	{	{
	"name": "deviceMacAddress",	"name": "deviceMacAddress",

	skipping to change at line 1899 ¶	skipping to change at line 1897 ¶
	"required": true,	"required": true,
	"caseExact": false,	"caseExact": false,
	"mutability": "readWrite",	"mutability": "readWrite",
	"returned": "default",	"returned": "default",
	"uniqueness": "Manufacturer"	"uniqueness": "Manufacturer"
	},	},
	{	{
	"name": "isRandom",	"name": "isRandom",
	"type": "boolean",	"type": "boolean",
	"description": "The isRandom flag is taken from the BLE \	"description": "The isRandom flag is taken from the BLE \

	core specifications 5.3. If true, device is using a random address\	core specifications 5.4. If true, device is using a random address\
	. Default value is false.",	. Default value is false.",
	"multiValued": false,	"multiValued": false,
	"required": false,	"required": false,
	"caseExact": false,	"caseExact": false,
	"mutability": "readWrite",	"mutability": "readWrite",
	"returned": "default",	"returned": "default",
	"uniqueness": "none"	"uniqueness": "none"
	},	},
	{	{
	"name": "separateBroadcastAddress",	"name": "separateBroadcastAddress",

	skipping to change at line 2697 ¶	skipping to change at line 2695 ¶
	required: true	required: true
	BleDeviceExtension:	BleDeviceExtension:
	type: object	type: object
	properties:	properties:
	versionSupport:	versionSupport:
	type: array	type: array
	items:	items:
	type: string	type: string
	description: Provides a list of all the BLE versions	description: Provides a list of all the BLE versions
	supported by the device, for example,	supported by the device, for example,

	[4.1, 4.2, 5.0, 5.1, 5.2, 5.3].	[4.1, 4.2, 5.0, 5.1, 5.2, 5.4].
	readOnly: false	readOnly: false
	writeOnly: false	writeOnly: false

	deviceMacAddress:	deviceMacAddress:
	type: string	type: string
	description: It is the public MAC address assigned by the	description: It is the public MAC address assigned by the
	manufacturer. It is a unique 48-bit value. The	manufacturer. It is a unique 48-bit value. The
	regex pattern is	regex pattern is
	^[0-9A-Fa-f]{2}(:[0-9A-Fa-f]{2}){5}.	^[0-9A-Fa-f]{2}(:[0-9A-Fa-f]{2}){5}.
	readOnly: false	readOnly: false
	writeOnly: false	writeOnly: false

	isRandom:	isRandom:
	type: boolean	type: boolean
	description: AddressType flag is taken from the BLE core	description: AddressType flag is taken from the BLE core

	specifications 5.3. If false, the device is	specifications 5.4. If false, the device is
	using a public MAC address. If true, device	using a public MAC address. If true, device
	is using a random address.	is using a random address.
	readOnly: false	readOnly: false
	writeOnly: false	writeOnly: false

	separateBroadcastAddress:	separateBroadcastAddress:
	type: string	type: string
	description: "When present, this address is used for	description: "When present, this address is used for
	broadcasts/advertisements. This value	broadcasts/advertisements. This value
	MUST NOT be set when an IRK is provided.	MUST NOT be set when an IRK is provided.

End of changes. 12 change blocks.
	18 lines changed or deleted	16 lines changed or added
This html diff was produced by rfcdiff 1.48.