2018-12-29  Jim Meyering  <meyering@fb.com>

	version 1.10
	* NEWS: Record release date.

2018-12-23  Paul Eggert  <eggert@cs.ucla.edu>

	build: enable -Wunreachable-code
	* configure.ac (nw): Remove -Wunreachable-code from the list of
	disabled warnings, now that all offending statements have been removed.

	maint: remove unreachable code
	Problem reported by Oracle Developer Studio 12.6.
	In the old days we needed a return statement at the end of
	the gzip main function to pacify traditional 'lint', but
	lint checkers nowadays are smarter.
	* gzip.c (main):
	* zip.c (file_read): Remove unreachable code.

2018-12-23  Jim Meyering  <meyering@fb.com>

	maint: use a slightly cleaner expression
	* gzip.c (do_list): Simplify an expression:
	- int positive_off_t_width = INT_BUFSIZE_BOUND (off_t) - 2;
	+ int positive_off_t_width = INT_STRLEN_BOUND (off_t) - 1;

2018-12-22  Jim Meyering  <meyering@fb.com>

	build: avoid build failure with --enable-gcc-warnings and latest gcc
	* gzip.c (do_list): There was a loop to compute the maximum width
	of a decimal positive off_t value. Replace it with assignment to a
	constant.  Noticed because gcc 9.0.0 20181219 warned about its use
	as a printf format-width value.
	(OFF_T_MAX): Remove now-unused definition.

2018-12-21  Jim Meyering  <meyering@fb.com>

	maint: improve a comment
	* trees.c (flush_block): Fix grammar/spelling in a comment.

	maint: update gnulib to latest; also update bootstrap and init.sh

	build: make the autoconf-2.63 requirement explicit
	* configure.ac: AC_PREREQ: Require 2.63, not 2.59.
	Autoconf-2.63 has been required for some time via gnulib.
	This merely makes it explicit.

2018-11-30  Paul Eggert  <eggert@cs.ucla.edu>

	gzip: fix use of uninitialized memory
	Problem reported by Hanno Böck (Bug#33501).
	* NEWS: Mention this.
	* inflate.c (inflate_dynamic): Return if code is invalid.
	Fix by Mark Adler.
	* tests/hufts: Add test case for the bug.

2018-08-19  Paul Eggert  <eggert@cs.ucla.edu>

	* gzip.c (remove_output_file): Fix typo.

	gzip: fix bug in signal-handling fix
	Problem reported by Johannes Przybilla (Bug#32375#26).
	* gzip.c (volatile_strcpy): Source is now pointer-to-volatile too.
	(remove_output_file): Copy remove_ofname to a private nonvolatile
	copy so that it can be passed to xunlink safely.

2018-08-06  Paul Eggert  <eggert@cs.ucla.edu>

	Fix some theoretical races in signal handling
	Problem reported by Johannes Przybilla (Bug#32375).
	* NEWS: Mention this.
	* bootstrap.conf (gnulib_modules): Add sigaction.
	* gzip.c (SA_NOCLDSTOP, sigprocmask, sigset_t)
	(siginterrupt) [!SA_NOCLDSTOP]: Remove; Gnulib not supplies these.
	(remove_ofname): New var.
	(volatile_strcpy): New function.
	(create_outfile): Use it.
	(install_signal_handlers, abort_gzip_signal): Assume sigaction.
	(remove_output_file): New arg SIGNALS_ALREADY_BLOCKED.
	All uses changed.  Avoid unnecessary (and racy) call
	to sigprocmask if this new arg is set.
	(abort_gzip_signal): Assume C89 or better for signal handler type.
	* gzip.h (RETSIGTYPE): Remove.
	* lib/.gitignore, m4/.gitignore:
	Add files brought in by Gnulib sigaction module.  Sort.

2018-08-04  Paul Eggert  <eggert@cs.ucla.edu>

	gzip: port better to mingw again
	Problem reported by Bdale Garbee (Bug#32305#8).
	* gzip.c (do_chown): Use HAVE_FCHOWN || HAVE_CHOWN,
	which is configured, instead of DO_CHOWN, which is not.

2018-08-02  Paul Eggert  <eggert@cs.ucla.edu>

	gzip: make the output more reproducible
	Problem reported by Bernhard M. Wiedemann (Bug#32342).
	* NEWS: Mention this.
	* doc/gzip.texi (Overview, Invoking gzip): Document this.
	* gzip.c (get_input_size_and_time): New function,
	which implements the change.
	(treat_stdin, treat_file): Use it.
	* tests/reproducible: New test.
	* tests/Makefile.am (TESTS): Add it.

2018-07-29  Paul Eggert  <eggert@cs.ucla.edu>

	gzip: port better to mingw
	Problem reported by Bdale Garbee for Debian
	* gzip.c (do_chown): Don't assume uid_t and gid_t.

2018-07-01  Jim Meyering  <meyering@fb.com>

	maint: update gnulib to latest; also update bootstrap and init.sh

2018-06-30  Jim Meyering  <meyering@fb.com>

	build: remove -Wformat-truncation=2 to avoid avoid false-positive
	* configure.ac (GNULIB_WARN_CFLAGS): Add -Wformat-truncation=2,
	to disable it when building gnulib with --enable-gcc-warnings.
	This avoids what looks like a false positive from GCC 9:
	strerror_r.c: In function 'rpl_strerror_r':
	strerror_r.c:453:35: error: 'Unknown error ' directive output \
	 truncated writing 14 bytes into a region of size 2 \
	 [-Werror=format-truncation=]
	         snprintf (buf, buflen, "Unknown error %d", errnum);
	                                 ~~^~~~~~~~~~~~
	In file included from /usr/include/stdio.h:862,
	                 from ./stdio.h:43,
	                 from strerror_r.c:29:
	/usr/include/bits/stdio2.h:64:10: note: '__builtin___snprintf_chk' \
	  output between 16 and 26 bytes into a destination of size 2
	   return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,

2018-01-15  Paul Eggert  <eggert@cs.ucla.edu>

	misc: update --version copyright
	* gunzip.in, gzexe.in, gzip.c, zcat.in, zdiff.in, zforce.in, zgrep.in:
	* zless.in, zmore.in, znew.in:
	Update copyright year in --version output to 2018.
	This part of the year-number update isn’t automated yet.

2018-01-07  Jim Meyering  <meyering@fb.com>

	maint: post-release administrivia
	* NEWS: Add header line for next release.
	* .prev-version: Record previous version.
	* cfg.mk (old_NEWS_hash): Auto-update.

	version 1.9
	* NEWS: Record release date.

2018-01-06  Paul Eggert  <eggert@cs.ucla.edu>

	gzexe: port to macOS mktemp
	Problem reported by Jeffrey Walton (Bug#30000).
	* gzexe.in, zdiff.in, zgrep.in:
	Don’t assume that mktemp works when given no arguments,
	as this is not true for macOS.  Instead, use a syntax
	that should work with coreutils, NetBSD, and macOS.
	While we’re in the neighborhood, be more consistent about how program
	names are used in temporary file names.  Also, watch out for TMPDIR
	values that are not absolute file names, since they can cause problems
	(e.g., leading "-").

2018-01-03  Jim Meyering  <meyering@fb.com>

	maint: update gnulib and copyright dates for 2018
	* gnulib: Update to latest.
	* bootstrap: Update from gnulib.
	* all files: Run "make update-copyright".

2017-12-16  Jim Meyering  <meyering@fb.com>

	build: update gnulib to latest

2017-11-24  Paul Eggert  <eggert@cs.ucla.edu>

	maint: zforce and zmore exit status cleanup
	Problem reported by Nelson H. F. Beebe.
	* zforce.in, zmore.in: On failure, exit with status 1 instead of
	with whatever failing status that printf or mv exited with.

2017-11-23  Paul Eggert  <eggert@cs.ucla.edu>

	gzexe: ensure file always exists
	* gzexe.in: When in a filesystem that does not support symlinks,
	use rm+cp rather than mv to make backups, so that the argument
	file always exists.

2017-11-23  Jim Meyering  <meyering@fb.com>

	build: update gnulib to latest

2017-11-16  Jim Meyering  <meyering@fb.com>

	gzexe: work even without the ability to make a hard link
	* gzexe.in: When ln -f fails to create a "~"-style backup,
	fall back to using mv -f.
	Reported by Bruno Haible in http://debbugs.gnu.org/29266

2017-11-15  Jim Meyering  <meyering@fb.com>

	build: make each generated script unwritable
	* Makefile.am (.in): Ensure that each generated script is unwritable.
	This makes it less likely that someone (even me) will mistakenly
	modify one of those generated files.

2017-11-13  Jim Meyering  <meyering@fb.com>

	zless, znew: exit 1 upon --help or --version write failure
	* zless.in: Exit 1 upon --help or --version write error.
	* znew.in: Likewise.

2017-11-12  Paul Eggert  <eggert@cs.ucla.edu>

	maint: script diagnostics status cleanup
	Problem reported by Bruno Haible (Bug#29266#20).
	* NEWS: Mention this.
	* gunzip.in, gzexe.in, zcat.in, zcmp.in, zdiff.in, zforce.in:
	* zgrep.in, zless.in, zmore.in, znew.in:
	Use printf instead of echo if the argument might contain ‘\’, at
	least in theory.  Don’t assume printf exits with status 1 on
	failure; it might be some other positive status.
	* gzexe.in: Use printf consistently instead of echo, and
	proscribe it instead of echo.

	tests: don’t be so strict about timestamps
	* tests/timestamp: We’ve had many false alarms about timestamps
	that are not gzip problems, but instead are problems with ‘touch’.
	Attempt to work around them by not trusting ‘touch’ so much.
	Problems and parts of solutions proposed by Bruno Haible.

2017-11-10  Paul Eggert  <eggert@cs.ucla.edu>

	build: update gnulib submodule to latest

2017-11-09  Jim Meyering  <meyering@fb.com>

	gnulib: update to latest

	maint: use noreturn, not ATTRIBUTE_NORETURN
	Use gnulib's stdnoreturn module so we can include
	<stdnoreturn.h> and the "noreturn" helper macro, thus
	replacing the definition and uses of ATTRIBUTE_NORETURN.
	* bootstrap.conf (gnulib_modules): Add stdnoreturn.
	* gzip.h (ATTRIBUTE_NORETURN): Remove definition.
	Include stdnoreturn.h and use "noreturn" for each
	ATTRIBUTE_NORETURN-adorned function declaration.
	* gzip.c (do_exit, try_help): Use "noreturn".

	tests: unpack-invalid: correct and clean up a test
	* tests/unpack-invalid: There was a logic error that would have
	caused this test to ignore a failure if first iteration of the
	loop set fail=1 and the second one reset it to 0.  Also, use
	"returns_ 1 ...", to require an exit status of 1.

2017-11-07  Paul Eggert  <eggert@cs.ucla.edu>

	gzip: diagnose out-of-range MTIME
	This seems to be the problem reported by Bruno Haible for GNU/Hurd
	i386 with touch 8.26 and glibc 2.24 (Bug#29033#20).
	* NEWS: Document this.
	* gzip.c (get_method): If MTIME is out of range for
	this platform, warn and substitute the nearest in-range
	value, instead of silently ignoring it.
	(do_list): Remove no-longer-needed test for unknown time stamp.

2017-11-06  Paul Eggert  <eggert@cs.ucla.edu>

	misc: diagnose year-2038 configuration problems
	* bootstrap.conf (gnulib_modules): Add year2038.
	* m4/.gitignore: Add year2038.m4[

	maint: remove IMPORT_FROM_GETTEXT
	* bootstrap.conf (IMPORT_FROM_GETTEXT): Remove.
	This is a relic from older Gnulib, and has no effect now.

2017-10-29  Jim Meyering  <meyering@fb.com>

	tests/unpack-valid: port to printf that do not grok hex
	Many versions of printf do not handle hexadecimal in a format string,
	so this test would fail.
	* tests/init.cfg (hex_printf_): Copied from grep's tests/init.cfg.
	* tests/unpack-valid: Use hex_printf_.
	Reported by Bruno Haible in https://bugs.gnu.org/29033#26

	gnulib: update to latest; also update tests/init.sh from gnulib

	gzip: fix bug with any upper case custom ('-S'-specified) suffix
	Any user-specified suffix with an upper case
	letter would fail to match desired file.
	* gzip.c (get_suffix): First, arrange to have only one return
	point rather than two. Put a lower-cased (just-malloc'd) copy
	of z_suffix in the suffix vector, and free it before returning.
	* tests/upper-suffix: New file.
	* tests/Makefile.am (TESTS): Add it.
	* NEWS: Mention it.
	Reported by meo@xenialab.it in https://bugs.gnu.org/29006

2017-10-16  Paul Eggert  <eggert@cs.ucla.edu>

	gzip: fix bug in unpack EOB check
	Problem reported by Vidar Holen (Bug#28861).
	* NEWS: Mention fix.
	* tests/unpack-valid: New test.
	* tests/Makefile.am (TESTS): Add it.
	* unpack.c (build_tree): Report an error if Huffman tree has
	too few leaves.
	* unpack.c (unpack): Fix check for EOB.
	Remove now-unnecessary check for code out of range.

2017-09-19  Jim Meyering  <meyering@fb.com>

	maint: fix "make syntax-check": remove useless HAVE_UTIME_H definitions
	* tailor.h: Don't define HAVE_UTIME_H.

	maint: avoid "make syntax-check" failure due to old-NEWS modification
	* cfg.mk (old_NEWS_hash): Update, to reflect recent NEWS correction.

2017-09-19  Paul Eggert  <eggert@cs.ucla.edu>

	gzexe: improve usage diagnostic
	* gzexe.in (usage): Reword for clarity (Bug#28514).

	misc: update --version copyright
	* gunzip.in, gzexe.in, gzip.c, zcat.in, zdiff.in, zforce.in, zgrep.in:
	* zless.in, zmore.in, znew.in: Update copyright year in --version
	output to 2017.

	maint: prefer HTTPS to HTTP, FTP in URLs

	maint: copy bootstrap from Gnulib

	maint: port to GCC 7.2
	* configure.ac (WERROR_CFLAGS): Avoid -Wduplicated-branches.
	* tailor.h (FALLTHROUGH): New macro, taken from Emacs.
	* gzip.c (main): Use it.

	maint: update .gitignore for recent Gnulib

	build: update gnulib submodule to latest

2017-05-07  Jim Meyering  <meyering@fb.com>

	maint: also distribute a zip-compressed tarball
	* configure.ac (AM_INIT_AUTOMAKE): Add dist-zip, for
	those lacking gzip, 7zip, etc.  Suggested by Karl Berry in
	https://bugs.gnu.org/25538.

2017-03-13  Paul Eggert  <eggert@cs.ucla.edu>

	gzip: port zdiff, zless to Busybox
	Problem reported by Denys Zagorui (Bug#26088).
	* tests/zdiff: Check that diff uses POSIX-format output.
	* zless.in (less_version): Don't exit merely because 'less -V'
	fails; instead, assume 'less' is compatible with an old version of
	the original 'less'.  Busybox 'less -V' fails, but apparently its
	'less' works anyway somehow.

2017-02-06  Jim Meyering  <meyering@fb.com>

	tests: avoid failure when running with no tty
	* tests/help-version (zcat_setup): Export TERM=dumb, to avoid zless
	malfunction.  Reported by Assaf Gordon in https://bugs.gnu.org/25636#8

	gnulib: update to latest; and tests/init.sh and bootstrap

	maint: change "time stamp" to "timestamp" globally
	This avoids a new syntax-check failure.
	* ChangeLog-2007: Perform that change.
	* NEWS: Likewise.
	* algorithm.doc: Likewise.
	* doc/gzip.texi: Likewise.
	* gunzip.in: Likewise.
	* gzip.1: Likewise.
	* gzip.c: Likewise.
	* gzip.h: Likewise.
	* m4/.gitignore: Likewise.
	* sample/ztouch: Likewise.
	* tests/timestamp: Likewise.
	* unzip.c: Likewise.
	* zip.c: Likewise.
	* znew.1: Likewise.
	* cfg.mk: Update the old news hash accordingly.

2017-01-01  Jim Meyering  <meyering@fb.com>

	maint: tweak a distcheck rule
	* dist-check.mk (my-distcheck): Don't use --disable-nls.
	That option is now unrecognized.

	maint: update gnulib and copyright dates for 2017
	* gnulib: Update to latest.
	* all files: Run "make update-copyright".

2016-11-08  Jim Meyering  <meyering@fb.com>

	maint: use "returns_" rather than explicit comparison with "$?"
	* tests/zdiff: Use "returns_ 1" rather than testing $? = 1.
	* tests/hufts: Likewise.
	* tests/timestamp: Likewise, but s/1/2/.

2016-11-04  Paul Eggert  <eggert@cs.ucla.edu>

	gzip: minor time stamp cleanups
	* NEWS: Document this.
	* gzip.c (get_method): Do not warn about MTIME out of range.
	This should avoid useless chatter on hosts with 32-bit time_t
	after the year 2038 (!).
	(do_list): Do not pass junk time stamp to localtime.
	(copy_stat): Do not report "time stamp restored" if restoration
	fails.

	gzip: --no-time cleanup
	Problem reported by Jim Meyering (Bug#24826).
	* gzip.c (longopts): Remove non-working no-time entry.
	(help) [UNDOCUMENTED]: Don't document it.

	gzip --no-name: avoid spurious warning
	Problem reported by Jim Meyering (Bug#24826).
	* tests/timestamp: Add a test from Jim Meyering to exercise the fix
	* zip.c (zip): Treat unknown time stamps as 0.

2016-10-24  Jim Meyering  <meyering@fb.com>

	maint: update .gitignore files to ignore more generated files

2016-10-02  Jim Meyering  <meyering@fb.com>

	maint: avoid unwarranted "make syntax-check" failure
	* tests/timestamp: Reorder "rm" arguments so the doubled-word
	syntax-check rule does not detect a false positive "in in" here.

	gnulib: update to latest

2016-09-07  Paul Eggert  <eggert@cs.ucla.edu>

	* doc/gzip.texi: Fix off-by-one timestamp.

2016-09-06  Paul Eggert  <eggert@cs.ucla.edu>

	gzip: fix some Y2038 etc. bugs
	* NEWS: Document this.
	* gzip.c (get_method): Warn about out-of-range MTIME,
	and ignore it instead of relying on possibly-undefined behavior.
	* tests/Makefile.am (TESTS): Add timestamp.
	* tests/timestamp: New test.
	* zip.c (zip): Warn about out-of-range file time stamp.

2016-08-29  Jim Meyering  <meyering@fb.com>

	maint: fix gzip-specific syntax-check rule
	* cfg.mk (sc_gzip_copyright_check): This rule had two problems.
	It was failing erroneously (the copyright date in gzip.c is fine),
	yet it was complaining.  The first problem is that the rule's
	diagnostic mentioned the wrong file: lib/version-etc.c, rather than
	./gzip.c. The second problem is that it specified this file name
	via "in_files" rather than the "in_vc_files" variable.

2016-06-12  Paul Eggert  <eggert@penguin.cs.ucla.edu>

	gzip: fix port to Atari by not defining ASMV
	Problem reported by Helmut Karlowski in: http://bugs.gnu.org/23751
	* tailor.h (ASMV) [ATARI || atarist]: Do not define.

2016-06-12  Paul Eggert  <eggert@cs.ucla.edu>

	gzip: drop mentions of Amiga, VMS
	These platforms were not supported anyway, and their code was
	suffering from bitrot.  This patch may also fix some file name
	glitches on MS-Windowsish platforms.
	* bootstrap.conf (gnulib_modules): Add dosname.
	* gzip.c: Include dosname.h.
	(shorten_name, treat_dir): Use last_component rather than looking
	at path separators by hand.
	* tailor.h: Remove sections on porting to VMS and to Amiga,
	since dosname.h doesn't support these platforms anyway.
	(PATH_SEP2, PATH_SEP3, STDC_HEADERS, SUFFIX_SEP, RECORD_IO)
	(HAVE_CHOWN, HAVE_LSTAT, HAVE_SYS_DIR_H, direct): Remove.  All
	uses removed.  Many uses replaced by calls to ISSLASH and/or
	last_component.

2016-04-29  Jim Meyering  <meyering@fb.com>

	maint: arrange for better URLs in generated announcement message
	* cfg.mk (url_dir_list): Define.  I had been correcting the generated
	URLs by hand, just before the announcement.  This is better.

2016-04-26  Jim Meyering  <meyering@fb.com>

	maint: post-release administrivia
	* NEWS: Add header line for next release.
	* .prev-version: Record previous version.
	* cfg.mk (old_NEWS_hash): Auto-update.

	version 1.8
	* NEWS: Record release date.

	gnulib: update to latest

2016-04-19  Paul Eggert  <eggert@cs.ucla.edu>

	gzip: simplify by closing ourselves
	This simplifies the previous fix, by avoiding the use of the
	closein module.  That module was problematic, as gzip normally
	does not use stdio for output and never uses it for input.
	Also, it is a heavyweight module, as it drags many files into lib
	(c-ctype.c, c-ctype.h, closein.c, closein.h, closeout.c, closeout.h,
	close-stream.c, close-stream.h, config.charset, c-strcasecmp.c,
	c-strcaseeq.h, c-strcase.h, c-strncasecmp.c, fpending.c, fpending.h,
	freadahead.c, freadahead.h, localcharset.c, localcharset.h, mbrtowc.c,
	mbsinit.c, quotearg.c, quotearg.h, quote.h, ref-add.sin, ref-del.sin,
	streq.h, wctype-h.c, wctype.in.h) and into m4 (closein.m4, closeout.m4,
	close-stream.m4, codeset.m4, configmake.m4, fpending.m4, freadahead.m4,
	glibc21.m4, localcharset.m4, locale-fr.m4, locale-ja.m4, locale-zh.m4,
	mbrtowc.m4, mbsinit.m4, mbstate_t.m4, quotearg.m4, wctype_h.m4),
	and these files are thus no longer needed.
	* bootstrap.conf (gnulib_modules): Remove closein.
	* gzip.c: Don't include closein.h.
	(stdin_was_read): New static var.
	(main): Don't use close_stdin.
	Invoke finish_out to exit after outputting via stdio's stdout.
	Close stdin after reading it.
	Restore previous way of closing stdout.
	(treat_stdin): Record that stdin was read.
	(finish_out): New function.

	gzip: fix bug with -l output to pipes
	Problem reported by Christian Franke via Eric Blake in:
	http://bugs.gnu.org/23314
	* NEWS: Mention this.
	* gzip.c (main): Do not close stdout twice when given -l.
	Instead, -l now just fflushes stdout, so that fdatasync
	can synchronize it if --synchronize is also specified.
	* tests/list: New test case.
	* tests/Makefile.am (TESTS): Add it.

2016-03-28  Paul Eggert  <eggert@cs.ucla.edu>

	Port to Oracle Solaris Studio 12.4
	Problem reported by Kiyoshi KANAZAWA in: http://bugs.gnu.org/23133
	* NEWS: Document this.
	* configure.ac (ASMV): Do not define if NO_ASM is
	anywhere in DEFS; it doesn't need to be surrounded by white space.
	* lib/match.c: Do not use x86 version if __x86_64__ is defined.

2016-03-27  Jim Meyering  <meyering@fb.com>

	maint: post-release administrivia
	* NEWS: Add header line for next release.
	* .prev-version: Record previous version.
	* cfg.mk (old_NEWS_hash): Auto-update.

	version 1.7
	* NEWS: Record release date.

2016-03-26  Paul Eggert  <eggert@cs.ucla.edu>

	Port to NetBSD 7.0
	Problem reported by Assaf Gordon in: http://bugs.gnu.org/23107#13
	* gzexe.in, zdiff.in, zgrep.in: Don't rely on mktemp -t,
	as it has a different meaning in NetBSD.

	* tests/init.sh: Sync from Gnulib.

	Port to Alpine Linux which uses Busybox
	* Makefile.am (check-local): Use plain diff rather than

2016-03-24  Jim Meyering  <meyering@fb.com>

	gzip: also honor GZIP=--rsyncable
	* gzip.c (main): Also accept --rsyncable when it is specified
	via the GZIP environment variable.
	I noticed this when gzip's "make dist" failed because maint.mk
	detected that gzip now honors --rsyncable, yet when it set GZIP_ENV
	to include that, and that propagated via automake-generated code
	to the GZIP setting used in the "make dist" rule, there, it was not
	honored, and caused "make dist" to fail.

2016-03-21  Paul Eggert  <eggert@cs.ucla.edu>

	Fix typo in previous patch

	Port to Solaris 11 /bin/sh
	* m4/shell.m4 (AC_PROG_SHELL): Reject Solaris 11 /bin/sh.
	A problem was reported by Nelson H. F. Beebe for OpenIndiana.
	I reproduced a problem with different symptoms on Solaris 11.
	Switching to Bash fixed it, and I hope this fixes it for
	OpenIndiana too, since both problems appear to be shell-related.

2016-03-18  Paul Eggert  <eggert@cs.ucla.edu>

	zgrep: with -f SPECIAL, read SPECIAL just once
	Problem reported by Fulvio Scapin in: http://bugs.gnu.org/22945
	* NEWS: Document this.
	* tests/zgrep-f: Add a test.
	Adjust a test to cover the case of more than one line in -f's input.
	* zgrep.in (with_filename): With -f FILE, if FILE is stdin or not
	a regular file, copy it into a temporary and use the temporary.

2016-03-15  Paul Eggert  <eggert@cs.ucla.edu>

	gzip: port to AIX 7.1 + xlc V12.1
	* inflate.c, unlzw.c, util.c: Include tailor.h after including any
	system include file that might in turn include signal.h for the
	first time, so that SIGPIPE is not #defined to 0 prematurely,
	which clashes with signal.h's SIGPIPE.

2016-03-15  Jim Meyering  <meyering@fb.com>

	gnulib: update to latest

	maint: don't ignore gitlog-to-changelog failure
	* Makefile.am (gen-ChangeLog): Don't ignore failure of
	gitlog-to-changelog. This syncs to coreutils' copy of this rule.

2016-03-06  Paul Eggert  <eggert@cs.ucla.edu>

	gzip: pacify clang
	* gzip.c (do_list): Use 2D array of char for month abbreviations,
	as this is clearer anyway, and it pacifies Clang.  Problem reported
	by Assaf Gordon in: http://bugs.gnu.org/22900#40

2016-03-06  Jim Meyering  <meyering@fb.com>

	tests: port to systems for which ":" is not the PATH separator
	* Makefile.am (new_path): New variable.
	(check-local): Use $(PATH_SEPARATOR) rather than a literal ":",
	to avoid "make syntax-check" failure.

2016-03-06  Paul Eggert  <eggert@cs.ucla.edu>

	doc: minor --rsyncable doc fixes
	* doc/gzip.texi (Sample): Mention --rsyncable.
	* gzip.c (help): Sort and do not capitalize the new --rsyncable
	help string.

	gzip: minor zgrep cleanup
	* zgrep.in: Simplify previous change.

	gzip: port zgrep to Solaris 11.2
	Problem reported by Assaf Gordon in: http://bugs.gnu.org/22900#11
	* zgrep.in: Port to Solaris 11.2 /bin/sh (ksh 93u 2011-02-08),
	where $? is 256+SIG when a process was killed with signal SIG, and
	where 'exit 257' is equivalent to 'exit 1'.  Apparently some other
	sh implementations use 256+128+SIG.  So, instead of using plain
	'exit $?', use the equivalent of 'exit ((128 * (128 <= $?)) + $? %
	128)' within the script, and use the equivalent of 'kill -$($? %
	128)' at the top level if the exit status is 128 or more.

	gzip: remove --__bindir
	* NEWS: Document this.
	* gzexe.in, gunzip.in, zcat.in, zcmp.in, zdiff.in, zegrep.in:
	* zfgrep.in, zforce.in, zgrep.in, zless.in, zmore.in, znew.in:
	Remove support for undocumented --__bindir option.  Callers can
	set PATH instead; that's less error-prone.  This fixes some
	'make check' failures on my Solaris 11 box, which occurred
	because the test scripts were mistakenly testing the installed
	gzip rather than the gzip in the working directory.
	* Makefile.am (.in): Don't replace bindir.
	(check-local): Set PATH instead of using --__bindir.
	* tests/help-version (gunzip_setuphelp, gzexe_setuphelp)
	(zcat_setuphelp, zcmp_setuphelp, zdiff_setuphelp)
	(zegrep_setuphelp, zfgrep_setuphelp, zforce_setuphelp)
	(zgrep_setuphelp, zless_setuphelp, zmore_setuphelp)
	(znew_setuphelp): Remove.  All uses removed.
	(lbracket_setup): Default args to empty.

2016-03-04  Jim Meyering  <meyering@fb.com>

	tests: fix "make check" failure on AIX 7.1
	* tests/Makefile.am (TESTS_ENVIRONMENT): Modernize:
	remove unused shell_or_perl_ function, and use an
	export_with_values function as grep does, to remove
	a lot of duplication.
	Reported by Assaf Gordon in http://debbugs.gnu.org/22900

2016-03-02  Rusty Russell  <rusty@rustcorp.com.au>

	gzip: support the --rsyncable option
	* deflate.c: Include verify.h.
	(RSYNC_WIN, RSYNC_SUM_MATCH): Define.
	(rsync_sum, rsync_chunk_end): Declare file-scoped globals.
	(lm_init): Initialize globals.
	(fill_window): Update rsync_chunk_end.
	(rsync_roll): New function.
	(RSYNC_ROLL): New macro.
	(FLUSH_BLOCK): Update for new "pad" parameter.
	(deflate_fast): Use RSYNC_ROLL and flush/pad.
	(deflate): Likewise.
	* trees.c (flush_block): Add "pad" parameter.
	* gzip.c (rsync): New global.
	(RSYNCABLE_OPTION, longopts, help): Add the option.
	(main): Set the new global.
	* gzip.h (rsync): Declare new global.
	(flush_block): Update prototype.
	* doc/gzip.texi: Document it.
	* gzip.1: Likewise.
	* bootstrap.conf: Use verify module.
	* NEWS (New feature): Mention it.
	* Makefile.am (check-local): Add tests and use AM_V__* command-
	hiding opions. Reported against Debian here:
	https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=118118

2016-02-28  Jim Meyering  <meyering@fb.com>

	maint: dist-check.mk: remove .deps dirs before comparing
	"make distcheck" with automake-from-trunk would fail like this:
	  ...
	  Only in /gz/tests/torture/gzip/test/gzip-1.6.42-9d47.old: .deps
	  Only in /gz/tests/torture/gzip/test/gzip-1.6.42-9d47.old/lib: .deps
	  Only in /gz/tests/torture/gzip/test/gzip-1.6.42-9d47.old/lib/glthread: .deps
	* dist-check.mk (my-distcheck): Remove all .deps directories before
	comparing the two hierarchies.

2016-02-28  Paul Eggert  <eggert@cs.ucla.edu>

	misc: update --version copyright
	* gunzip.in, gzexe.in, zcat.in, zdiff.in, zforce.in, zgrep.in:
	* zless.in, zmore.in, znew.in: Update copyright year in --version
	output to 2016.

	gzip: new option --synchronous
	This follows up on the earlier patch to avoid data loss near the
	system crashes.  It makes the new behavior optional, with the
	default off.  See: http://bugs.gnu.org/22768
	* NEWS, doc/gzip.texi (Sample, Invoking gzip), gunzip.in (usage):
	* gzip.1, zcat.in (usage):
	Document this.
	* gzip.c (synchronous): New static var.
	(SYNCHRONOUS_OPTION): New constant.
	(longopts, help, main, treat_file): Add support for --synchronous.

	gzip: use constants, not fileno
	* gzip.c (main, treat_stdin, treat_file, get_method)
	(check_ofname): Prefer STDIN_FILENO to fileno (stdin),
	and similarly for STDOUT_FILENO.

	gzip: fdatasync output dir before unlinking
	This follows up on the earlier patch to avoid data loss near
	the system crashes.  See: http://bugs.gnu.org/22768
	* bootstrap.conf (gnulib_modules): Add dirname-lgpl, fdatasync,
	openat-safer, unistd-safer, unlinkat.
	* gzip.c: Include stddef.h, dirname.h.
	Include fcntl--.h instead of fcntl-safer.h.
	(RW_USER): Remove; no longer needed.
	(dfname, dfd): New static vars.
	(dot): New static const.
	(atdir_eq, atdir_set): New functions.
	(treat_file): Also fdatasync the output directory, if !keep.
	(treat_file, create_outfile, open_and_stat):
	Use dir fd for unlinkat and openat, if possible.
	(open_and_stat): Omit mode argument, since it was always the
	same.  All callers changed.
	* lib/.gitignore, m4/.gitignore: Add new gnulib files.
	* tailor.h (PROTO, NO_STDIN_FSTAT, OPEN): Remove.  Remove MACOS
	section, as this stuff would not work anyway now, and circa 2001
	Apple stopped supporting Mac OS 9 and earlier.
	* zip.c: Do not include unistd.h and fcntl.h, as this file does
	not directly use any symbols defined by those headers.

2016-02-22  Paul Eggert  <eggert@cs.ucla.edu>

	fsync output file before closing
	Problem reported by Yanyan Jiang 蒋炎岩 in: http://bugs.gnu.org/22768
	* NEWS: Document this.
	* bootstrap.conf (gnulib_modules): Add fsync.
	* gzip.c (treat_file): Call fsync just before closing the output.
	* lib/.gitignore, m4/.gitignore: Add fsync-related gnulib files.

2016-01-22  Jason Leschnik  <jason@leschnik.me>

	doc: correct a diagnostic in man page to match actual
	* gzip.1: s/no change/unchanged/
	This addresses http://debbugs.gnu.org/22413

2016-01-01  Jim Meyering  <meyering@fb.com>

	maint: update copyright year, bootstrap, init.sh
	Run "make update-copyright" and then...

	* gzip.c: Transform the copyright notice via s/2015/2016/.
	* gnulib: Update to latest.
	* tests/init.sh: Update from gnulib.
	* bootstrap: Likewise.

2015-11-01  Jim Meyering  <meyering@fb.com>

	maint: avoid three warnings from the very latest gcc-built-from-git
	* unzip.c (unzip): Correct two format strings to match the types of the corresponding arguments.
	* unlzw.c (unlzw): Cast an "int" to unsigned to match expected type of %x.

2015-08-24  Jim Meyering  <meyering@fb.com>

	maint: adjust copyright notices in *.in files to be consistent
	The copyright year ranges in *.in files were not being updated,
	because of a missing ", Inc." suffix.  Add that, run
	run "make udpate-copyright", and ensure 2010..2015 year
	ranges are covered.
	* gunzip.in: Update copyright notice and year ranges.
	* gzexe.in: Likewise.
	* zcat.in: Likewise.
	* zdiff.in: Likewise.
	* zforce.in: Likewise.
	* zgrep.in: Likewise.
	* zless.in: Likewise.
	* zmore.in: Likewise.
	* znew.in: Likewise.

2015-08-24  Jim Meyering  <meyering@fb.com>

	build: avoid -Wshift-negative-value warning
	Configured with --enable-gcc-warnings, a gcc-6.x build would fail with this:

	  gzip.c:118:32: error: left shift of negative value
	   #define OFF_T_MIN (~ (off_t) 0 << (sizeof (off_t) * CHAR_BIT - 1))

	* gzip.c [OFF_T_MAX]: Define in terms of TYPE_MAXIMUM, not OFF_T_MIN.
	[OFF_T_MIN]: Remove now-unused definition.
	Include "intprops.h" for definiton of TYPE_MAXIMUM.
	* bootstrap.conf (gnulib_modules): Add intprops.

2015-07-30  Jim Meyering  <meyering@fb.com>

	maint: remove dead code
	This package has not been compilable with -DCRYPT
	since commit v1.4-82-g9d1b943.  Remove final vestiges.
	* bits.c (copy_block) [CRYPT]: Remove #ifdef'd code.
	* inflate.c (NEXTBYTE) [CRYPT]: Likewise.
	Prompted by a report from Flávio Medeiros
	that HEADER and T might be used uninitialized.

2015-03-17  Paul Eggert  <eggert@cs.ucla.edu>

	gzip: make the GZIP env var obsolescent
	* NEWS, gzip.1:
	* doc/gzip.texi (Environment, Tapes): Document this.
	* gzip.c (args): Remove static var; no longer needed now that
	'main' frees it.  All uses removed.
	(ENV_OPTION, shortopts): New constants.
	(main): Warn about nontrivial uses of GZIP.  Reject dangerous uses.
	* tests/gzip-env: New test case.
	* tests/Makefile.am (TESTS): Add it.
	* util.c (add_envopt): Create new vector instead of adding to old
	one.  Only use changed.

2015-03-13  Paul Eggert  <eggert@cs.ucla.edu>

	maint: adjust to recent gnulib
	* doc/.gitignore: Add gendocs_template_min.
	* lib/.gitignore: Add assure.h.

2015-02-08  Jim Meyering  <meyering@fb.com>

	maint: ensure that --version's copyright date is current
	* cfg.mk (sc_gzip_copyright_check): Ensure we keep this copyright
	year number up to date.  Reported by Paul Eggert.
	* gzip.c (license_msg): Include only the current year number,
	as is done in nearly every other program.

	gnulib: update to latest

2015-01-01  Jim Meyering  <meyering@fb.com>

	maint: update copyright year ranges to include 2015; update gnulib

2014-11-10  Jim Meyering  <meyering@fb.com>

	maint: move new NEWS entry into block for upcoming release
	* NEWS: Move the latest NEWS entry from the block for gzip-1.6
	into the block for the upcoming release.

2014-11-10  Paul Eggert  <eggert@cs.ucla.edu>

	gzip: adjust -v output when -k is also specified
	Problem reported by Eric Benoit in: http://bugs.gnu.org/16401
	* gzip.c (treat_file): When keeping a file, don't say it's replaced.
	* NEWS: Document this.
	* tests/keep: Test this.

2014-11-10  Jim Meyering  <meyering@fb.com>

	maint: enable more syntax checks
	* cfg.mk (local-checks-to-skip): Remove several rule names from this
	list, thus enabling the corresponding checks.  To fix some, I made
	syntactic changes to source files.  In other cases, I exempted certain
	files from the checks.
	Add exemptions for these:
	  sc_prohibit_atoi_atof = ^(gzip|sample/sub)\.c$$
	  sc_space_tab = ^lib/match\.c$$
	  sc_useless_cpp_parens = ^(lib/match\.c|tailor\.h)$$
	* configure.ac: Add quotes to fix under-quoting.
	* deflate.c: Remove unnecessary cpp parentheses.
	* tests/Makefile.am (TEST_ENVIRONMENT): Remove space-before-TAB.
	* unlzw.c: Change some TABs to spaces.

	maint: avoid false positive match in check for double semicolon
	* cfg.mk (exclude_file_name_regexp--sc_prohibit_double_semicolon):
	Exempt the file, lib/match.c, from gnulib's new double-semicolon
	check.

	gnulib+bootstrap: update to latest
	* gnulib: Update the submodule.
	* bootstrap: Update from gnulib.

2014-10-10  Paul Eggert  <eggert@cs.ucla.edu>

	tests: use local dir for output
	Reported by Kiyoshi KANAZAWA in: http://bugs.gnu.org/18679
	* tests/unpack-invalid: Use local directory, not /tmp, for output.

2014-08-10  Paul Eggert  <eggert@cs.ucla.edu>

	gzip: fix --suffix=z bug (Bug#18239)
	* gzip.c (get_suffix): Put --suffix string at the end
	of the list of suffixes if it is a suffix of one one them.
	* tests/z-suffix: New file.
	* tests/Makefile.am (TESTS): Add it.

2014-06-12  Paul Eggert  <eggert@cs.ucla.edu>

	zgrep: exit with status 0 if a file matches and there's no trouble
	Reported by Pavel Raiskup in: http://bugs.gnu.org/17760
	* zgrep.in (res): Treat exit status 0 to be greater than 1.
	Also, exit immediately on software configuration error.

2014-06-07  Paul Eggert  <eggert@cs.ucla.edu>

	doc: use UTF-8 in the manual
	* doc/gzip.texi: Switch to UTF-8 encoding.  Fix ASCIIisms.
	Don't use @sc; plain caps are fine for GNU manuals.

	maint: update .gitignore files
	* lib/.gitignore, m4/.gitignore: Adjust to match current sources.
	Also, sort.

2014-06-07  Jim Meyering  <meyering@fb.com>

	maint: udpate all copyright notices via "make update-copyright"

	maint: update copyright year range in gzip.texi
	* doc/gzip.texi: Update copyright date.

	maint: update gnulib to latest and adapt streamsavedir usage
	* gnulib: Update module to latest.
	* gzip.c (treat_dir): Gnulib's streamsavedir API has changed:
	call it with a new argument, SAVEDIR_SORT_NONE, to retain the
	preceding behavior.

2014-03-06  Paul Eggert  <eggert@cs.ucla.edu>

	zless: improve gzip failure checking, and port to new -V format
	Problem reported by Jaroslaw Weglinski, and LESSOPEN change
	suggested by Mark Nudelman, in: http://bugs.gnu.org/16951
	This doesn't fix bug 16951 entirely, as 'less' needs to be changed
	too, but it's a start.
	* zless.in (check_exit_status): New var.
	(LESSOPEN): Use it.
	(use_input_pipe_on_stdin): Adjust to output format on Fedora 20,
	where 'less -V' outputs "less 458 (POSIX regular expressions)"
	on the first line.

2013-10-24  Paul Eggert  <eggert@cs.ucla.edu>

	gzip: fix permissions issue on Solaris-like systems
	I.e., on systems that let users give files away.
	* gzip.c (do_chown): New function.
	(copy_stat): Use it, to change the group, then the permissions,
	then the owner.  Idea suggested by Vladimir Marek in
	<http://bugs.gnu.org/15672#11>

2013-10-03  Paul Eggert  <eggert@cs.ucla.edu>

	znew: avoid denial-of-service issue
	Reported by Rich Burridge in <http://bugs.gnu.org/15522>.
	* znew.in: Rewrite to avoid the need for a temporary file in /tmp.
	That way, we avoid the need for set -C
	and worrying about denial of service.
	Use touch -r and chmod --reference rather than cpmod.
	Assume cp -p works, as it's now universal.
	Quote 'echo' args better, while we're at it.
	(warn, tmp, cpmod, cpmodarg): Remove.
	(GZIP): Unset, so that we needn't test for gzip extension.
	(ext): Now always '.gz'.
	* znew.1: Document the change of implementation assumptions.

2013-06-19  Paul Eggert  <eggert@cs.ucla.edu>

	Fix spelling typo in newly-added comment.

	tests: zgrep-signal race condition fix
	* tests/zgrep-signal: Check that Perl supports dup2.
	(exec_with_SIGPIPE_SIGDFL): Remove.
	(write_to_dangling_pipe): Simplify by moving more of it into Perl.
	Fix race condition, where subcommand writes to a pipe before the ":"
	command exits.  Problem reported by Thorsten Glaser in
	<http://lists.gnu.org/archive/html/bug-gzip/2013-06/msg00028.html>.

2013-06-12  Paul Eggert  <eggert@cs.ucla.edu>
