# Makefile.in generated by automake 1.15.1 from Makefile.am.
# doc/manual/Makefile.  Generated from Makefile.in by configure.

# Copyright (C) 1994-2017 Free Software Foundation, Inc.

# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.



# -*- mode: makefile -*-

####################################
# Everything below here is generic #
####################################

am__is_gnu_make = { \
  if test -z '$(MAKELEVEL)'; then \
    false; \
  elif test -n '$(MAKE_HOST)'; then \
    true; \
  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
    true; \
  else \
    false; \
  fi; \
}
am__make_running_with_option = \
  case $${target_option-} in \
      ?) ;; \
      *) echo "am__make_running_with_option: internal error: invalid" \
              "target option '$${target_option-}' specified" >&2; \
         exit 1;; \
  esac; \
  has_opt=no; \
  sane_makeflags=$$MAKEFLAGS; \
  if $(am__is_gnu_make); then \
    sane_makeflags=$$MFLAGS; \
  else \
    case $$MAKEFLAGS in \
      *\\[\ \	]*) \
        bs=\\; \
        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
    esac; \
  fi; \
  skip_next=no; \
  strip_trailopt () \
  { \
    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
  }; \
  for flg in $$sane_makeflags; do \
    test $$skip_next = yes && { skip_next=no; continue; }; \
    case $$flg in \
      *=*|--*) continue;; \
        -*I) strip_trailopt 'I'; skip_next=yes;; \
      -*I?*) strip_trailopt 'I';; \
        -*O) strip_trailopt 'O'; skip_next=yes;; \
      -*O?*) strip_trailopt 'O';; \
        -*l) strip_trailopt 'l'; skip_next=yes;; \
      -*l?*) strip_trailopt 'l';; \
      -[dEDm]) skip_next=yes;; \
      -[JT]) skip_next=yes;; \
    esac; \
    case $$flg in \
      *$$target_option*) has_opt=yes; break;; \
    esac; \
  done; \
  test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/p11-kit
pkgincludedir = $(includedir)/p11-kit
pkglibdir = $(libdir)/p11-kit
pkglibexecdir = $(libexecdir)/p11-kit
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = x86_64-pc-linux-gnu
host_triplet = x86_64-pc-cygwin
subdir = doc/manual
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/build/m4/gettext.m4 \
	$(top_srcdir)/build/m4/iconv.m4 \
	$(top_srcdir)/build/m4/lib-ld.m4 \
	$(top_srcdir)/build/m4/lib-link.m4 \
	$(top_srcdir)/build/m4/lib-prefix.m4 \
	$(top_srcdir)/build/m4/libtool.m4 \
	$(top_srcdir)/build/m4/ltoptions.m4 \
	$(top_srcdir)/build/m4/ltsugar.m4 \
	$(top_srcdir)/build/m4/ltversion.m4 \
	$(top_srcdir)/build/m4/lt~obsolete.m4 \
	$(top_srcdir)/build/m4/nls.m4 $(top_srcdir)/build/m4/po.m4 \
	$(top_srcdir)/build/m4/progtest.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
AM_V_P = $(am__v_P_$(V))
am__v_P_ = $(am__v_P_$(AM_DEFAULT_VERBOSITY))
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_$(V))
am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
am__v_GEN_0 = @echo "  GEN     " $@;
am__v_GEN_1 = 
AM_V_at = $(am__v_at_$(V))
am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
am__v_at_0 = @
am__v_at_1 = 
SOURCES =
DIST_SOURCES =
am__can_run_installinfo = \
  case $$AM_UPDATE_INFO_DIR in \
    n|no|NO) false;; \
    *) (install-info --version) >/dev/null 2>&1;; \
  esac
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
  for p in $$list; do echo "$$p $$p"; done | \
  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
    if (++n[$$2] == $(am__install_max)) \
      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
    END { for (dir in files) print dir, files[dir] }'
am__base_list = \
  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__uninstall_files_from_dir = { \
  test -z "$$files" \
    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
         $(am__cd) "$$dir" && rm -f $$files; }; \
  }
man1dir = $(mandir)/man1
am__installdirs = "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(man5dir)" \
	"$(DESTDIR)$(man8dir)"
man5dir = $(mandir)/man5
man8dir = $(mandir)/man8
NROFF = nroff
MANS = $(man1_MANS) $(man5_MANS) $(man8_MANS)
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
am__DIST_COMMON = $(srcdir)/Makefile.in \
	$(top_srcdir)/build/gtk-doc.make
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = ${SHELL} /usr/src/testing/p11-kit-0.23.9-1/p11-kit-0.23.9/build/litter/missing aclocal-1.15
AMTAR = $${TAR-tar}
AM_DEFAULT_VERBOSITY = 1
AR = x86_64-pc-cygwin-ar
AUTOCONF = ${SHELL} /usr/src/testing/p11-kit-0.23.9-1/p11-kit-0.23.9/build/litter/missing autoconf
AUTOHEADER = ${SHELL} /usr/src/testing/p11-kit-0.23.9-1/p11-kit-0.23.9/build/litter/missing autoheader
AUTOMAKE = ${SHELL} /usr/src/testing/p11-kit-0.23.9-1/p11-kit-0.23.9/build/litter/missing automake-1.15
AWK = gawk
CC = x86_64-pc-cygwin-gcc
CCDEPMODE = depmode=gcc3
CFLAGS = -O2 -pedantic -fomit-frame-pointer -m64 -g 		-Wall -Wstrict-prototypes -Wmissing-declarations 		-Wmissing-prototypes -Wnested-externs -Wpointer-arith 		-Wdeclaration-after-statement -Wformat=2 -Winit-self 		-Waggregate-return -Wno-missing-format-attribute 		-fno-strict-aliasing -fno-common -Wmissing-include-dirs -Wundef
CPP = x86_64-pc-cygwin-gcc -E
CPPFLAGS = 
CYGPATH_W = echo
DEFS = -DHAVE_CONFIG_H
DEPDIR = .deps
DLLTOOL = x86_64-pc-cygwin-dlltool
DSYMUTIL = 
DUMPBIN = 
ECHO_C = 
ECHO_N = -n
ECHO_T = 
EGREP = /usr/bin/grep -E
EXEEXT = .exe
FGREP = /usr/bin/grep -F
GCOV = 
GENHTML = 
GETTEXT_MACRO_VERSION = 0.19
GMSGFMT = /usr/bin/msgfmt
GMSGFMT_015 = /usr/bin/msgfmt
GREP = /usr/bin/grep
GTKDOC_CHECK = 
GTKDOC_MKPDF = 
GTKDOC_REBASE = true
GTKDOC_SCAN = 
HASH_LIBS = 
HTML_DIR = ${datadir}/gtk-doc/html
INSTALL = /usr/bin/install -c
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_PROGRAM = ${INSTALL}
INSTALL_SCRIPT = ${INSTALL}
INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
INTLLIBS = -lintl -liconv
INTL_MACOSX_LIBS = 
LCOV = 
LD = /home/cygsimple/opt/usr/x86_64-pc-cygwin/bin/ld
LDFLAGS = 
LIBFFI_CFLAGS = -I/usr/lib/libffi-3.2.1/include 
LIBFFI_LIBS = -L/usr/lib/../lib -lffi 
LIBICONV = -liconv
LIBINTL = -lintl -liconv
LIBOBJS = 
LIBS = 
LIBTASN1_CFLAGS = 
LIBTASN1_LIBS = -ltasn1 
LIBTOOL = $(SHELL) $(top_builddir)/libtool
LIPO = 
LN_S = ln -s
LTLIBICONV = -liconv
LTLIBINTL = -lintl -liconv
LTLIBOBJS = 
LT_SYS_LIBRARY_PATH = 
MAINT = 
MAKEINFO = ${SHELL} /usr/src/testing/p11-kit-0.23.9-1/p11-kit-0.23.9/build/litter/missing makeinfo
MANIFEST_TOOL = :
MKDIR_P = /usr/bin/mkdir -p
MSGFMT = /usr/bin/msgfmt
MSGFMT_015 = /usr/bin/msgfmt
MSGMERGE = /usr/bin/msgmerge
NM = /home/cygsimple/opt/usr/bin/x86_64-pc-cygwin-nm -B
NMEDIT = 
OBJDUMP = x86_64-pc-cygwin-objdump
OBJEXT = o
OTOOL = 
OTOOL64 = 
P11KIT_LT_RELEASE = 3:0:3
PACKAGE = p11-kit
PACKAGE_BUGREPORT = https://bugs.freedesktop.org/enter_bug.cgi?product=p11-glue
PACKAGE_NAME = p11-kit
PACKAGE_STRING = p11-kit 0.23.9
PACKAGE_TARNAME = p11-kit
PACKAGE_URL = http://p11-glue.freedesktop.org/p11-kit.html
PACKAGE_VERSION = 0.23.9
PATH_SEPARATOR = :
PKG_CONFIG = /usr/bin/pkg-config
PKG_CONFIG_LIBDIR = 
PKG_CONFIG_PATH = 
POSUB = po
RANLIB = x86_64-pc-cygwin-ranlib
SED = /usr/bin/sed
SET_MAKE = 
SHELL = /bin/sh
SHLEXT = .dll
STRIP = x86_64-pc-cygwin-strip
USE_NLS = yes
VERSION = 0.23.9
XGETTEXT = /usr/bin/xgettext
XGETTEXT_015 = /usr/bin/xgettext
XGETTEXT_EXTRA_OPTIONS = 
XSLTPROC = /usr/bin/xsltproc
abs_builddir = /usr/src/testing/p11-kit-0.23.9-1/p11-kit-0.23.9/doc/manual
abs_srcdir = /usr/src/testing/p11-kit-0.23.9-1/p11-kit-0.23.9/doc/manual
abs_top_builddir = /usr/src/testing/p11-kit-0.23.9-1/p11-kit-0.23.9
abs_top_srcdir = /usr/src/testing/p11-kit-0.23.9-1/p11-kit-0.23.9
ac_ct_AR = 
ac_ct_CC = 
ac_ct_DUMPBIN = 
am__include = include
am__leading_dot = .
am__quote = 
am__tar = $${TAR-tar} chof - "$$tardir"
am__untar = $${TAR-tar} xf -
bindir = ${exec_prefix}/bin
build = x86_64-pc-linux-gnu
build_alias = x86_64-pc-linux-gnu
build_cpu = x86_64
build_os = linux-gnu
build_vendor = pc
builddir = .
datadir = ${datarootdir}
datarootdir = ${prefix}/share
docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
dvidir = ${docdir}
exec_prefix = ${prefix}
host = x86_64-pc-cygwin
host_alias = x86_64-pc-cygwin
host_cpu = x86_64
host_os = cygwin
host_vendor = pc
htmldir = ${docdir}
includedir = ${prefix}/include
infodir = ${datarootdir}/info
install_sh = ${SHELL} /usr/src/testing/p11-kit-0.23.9-1/p11-kit-0.23.9/build/litter/install-sh
libdir = ${exec_prefix}/lib
libexecdir = ${exec_prefix}/libexec
localedir = ${datarootdir}/locale
localstatedir = /var
mandir = ${datarootdir}/man
mkdir_p = $(MKDIR_P)
oldincludedir = /usr/include
p11_module_path = ${exec_prefix}/lib/pkcs11
p11_package_config_modules = ${pkgdatadir}/modules
p11_system_config = /etc/pkcs11
p11_system_config_file = /etc/pkcs11/pkcs11.conf
p11_system_config_modules = /etc/pkcs11/modules
p11_user_config = ~/.config/pkcs11
p11_user_config_file = ~/.config/pkcs11/pkcs11.conf
p11_user_config_modules = ~/.config/pkcs11/modules
pdfdir = ${docdir}
prefix = /usr
privatedir = ${libexecdir}/p11-kit
program_transform_name = s,x,x,
psdir = ${docdir}
sbindir = ${exec_prefix}/sbin
sharedstatedir = /var
srcdir = .
sysconfdir = /etc
target_alias = 
top_build_prefix = ../../
top_builddir = ../..
top_srcdir = ../..
with_trust_paths = /etc/pki/ca-trust/source:/usr/share/pki/ca-trust-source
NULL = 

# We require automake 1.6 at least.
AUTOMAKE_OPTIONS = 1.6

# The name of the module, e.g. 'glib'.
DOC_MODULE = p11-kit

# The top-level SGML file. You can change this if you want to.
DOC_MAIN_SGML_FILE = $(DOC_MODULE)-docs.xml

# The directory containing the source code. Relative to $(srcdir).
# gtk-doc will search all .c & .h files beneath here for inline comments
# documenting the functions and macros.
# e.g. DOC_SOURCE_DIR=../../../gtk
DOC_SOURCE_DIR = $(top_srcdir)/p11-kit

# Extra options to pass to gtkdoc-scangobj. Not normally needed.
SCANGOBJ_OPTIONS = --version

# Extra options to supply to gtkdoc-scan.
# e.g. SCAN_OPTIONS=--deprecated-guards="GTK_DISABLE_DEPRECATED"
SCAN_OPTIONS = --rebuild-types --deprecated-guards="P11_KIT_DISABLE_DEPRECATED"

# Extra options to supply to gtkdoc-mkdb.
# e.g. MKDB_OPTIONS=--sgml-mode --output-format=xml
MKDB_OPTIONS = --sgml-mode --output-format=xml

# Extra options to supply to gtkdoc-mktmpl
# e.g. MKTMPL_OPTIONS=--only-section-tmpl
MKTMPL_OPTIONS = 

# MKHTML_OPTIONS=--path="$(builddir)/html $(srcdir)/html"

# Extra options to supply to gtkdoc-fixref. Not normally needed.
# e.g. FIXXREF_OPTIONS=--extra-dir=../gdk-pixbuf/html --extra-dir=../gdk/html
FIXXREF_OPTIONS = 

# Used for dependencies. The docs will be rebuilt if any of these change.
# e.g. HFILE_GLOB=$(top_srcdir)/gtk/*.h
# e.g. CFILE_GLOB=$(top_srcdir)/gtk/*.c
HFILE_GLOB = $(top_srcdir)/p11-kit/*.h
CFILE_GLOB = $(top_srcdir)/p11-kit/*.c

# Header files to ignore when scanning.
# e.g. IGNORE_HFILES=gtkdebug.h gtkintl.h
IGNORE_HFILES = \
	private.h \
	pkcs11.h \
	conf.h \
	debug.h \
	dict.h \
	filter.h \
	log.h \
	mock.h \
	modules.h \
	pkcs11.h \
	pkcs11i.h \
	pkcs11x.h \
	private.h \
	client.h \
	proxy.h \
	rpc.h \
	rpc-message.h \
	util.h \
	virtual.h \
	virtual-fixed.h \
	array.h \
	compat.h \
	$(NULL)


# Images to copy into HTML directory.
# e.g. HTML_IMAGES=$(top_srcdir)/gtk/stock-icons/stock_about_24.png
HTML_IMAGES = 
generate_files = \
	version.xml \
	userdir.xml \
	sysdir.xml \
	$(NULL)


# Extra SGML files that are included by $(DOC_MAIN_SGML_FILE).
# e.g. content_files=running.sgml building.sgml changes-2.0.sgml
content_files = p11-kit-config.xml p11-kit-sharing.xml \
	p11-kit-devel.xml \
	p11-kit-proxy.xml \
	p11-kit-trust.xml \
	p11-kit.xml \
	pkcs11.conf.xml \
	trust.xml \
	annotation-glossary.xml \
	$(NULL)


# SGML files where gtk-doc abbrevations (#GtkWidget) are expanded
# These files must be listed here *and* in content_files
# e.g. expand_content_files=running.sgml
expand_content_files = $(generate_files)

# CFLAGS and LDFLAGS for compiling gtkdoc-scangobj with your library.
# Only needed if you are using gtkdoc-scangobj to dynamically query widget
# signals and properties.
# e.g. INCLUDES=-I$(top_srcdir) -I$(top_builddir) $(GTK_DEBUG_FLAGS)
# e.g. GTKDOC_LIBS=$(top_builddir)/gtk/$(gtktargetlib)
GTKDOC_LIBS = 
#GTKDOC_CC = $(CC) $(INCLUDES) $(GTKDOC_DEPS_CFLAGS) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
GTKDOC_CC = $(LIBTOOL) --tag=CC --mode=compile $(CC) $(INCLUDES) $(GTKDOC_DEPS_CFLAGS) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
#GTKDOC_LD = $(CC) $(GTKDOC_DEPS_LIBS) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS)
GTKDOC_LD = $(LIBTOOL) --tag=CC --mode=link $(CC) $(GTKDOC_DEPS_LIBS) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS)
#GTKDOC_RUN = 
GTKDOC_RUN = $(LIBTOOL) --mode=execute

# We set GPATH here; this gives us semantics for GNU make
# which are more like other make's VPATH, when it comes to
# whether a source that is a target of one rule is then
# searched for in VPATH/GPATH.
#
GPATH = $(srcdir)
TARGET_DIR = $(HTML_DIR)/$(DOC_MODULE)
SETUP_FILES = \
	$(content_files)		\
	$(DOC_MAIN_SGML_FILE)		\
	$(DOC_MODULE)-sections.txt	\
	$(DOC_MODULE)-overrides.txt	\
	style.css

EXTRA_DIST = $(HTML_IMAGES) $(SETUP_FILES) $(MAN_IN_FILES) $(NULL)
DOC_STAMPS = setup-build.stamp scan-build.stamp sgml-build.stamp \
	html-build.stamp pdf-build.stamp \
	sgml.stamp html.stamp pdf.stamp

SCANOBJ_FILES = \
	$(DOC_MODULE).args 	 \
	$(DOC_MODULE).hierarchy  \
	$(DOC_MODULE).interfaces \
	$(DOC_MODULE).prerequisites \
	$(DOC_MODULE).signals

REPORT_FILES = \
	$(DOC_MODULE)-undocumented.txt \
	$(DOC_MODULE)-undeclared.txt \
	$(DOC_MODULE)-unused.txt

CLEANFILES = $(SCANOBJ_FILES) $(REPORT_FILES) $(DOC_STAMPS) \
	$(generate_files) $(man1_MANS) $(man5_MANS) $(man8_MANS) \
	$(NULL)
##HTML_BUILD_STAMP = 
#HTML_BUILD_STAMP = html-build.stamp
#PDF_BUILD_STAMP = 
##PDF_BUILD_STAMP = pdf-build.stamp
man1_MANS = 

# This includes the standard gtk-doc make rules, copied by gtkdocize.
#man1_MANS = trust.1
man8_MANS = 
#man8_MANS = p11-kit.8
man5_MANS = 
#man5_MANS = pkcs11.conf.5
#XSLTPROC_FLAGS = \
#        --nonet \
#        --stringparam man.output.quietly 1 \
#        --stringparam funcsynopsis.style ansi \
#        --stringparam man.th.extra1.suppress 1 \
#        --stringparam man.authors.section.enabled 0 \
#        --stringparam man.copyright.section.enabled 0

#XSLTPROC_MAN = \
#	$(XSLTPROC) $(XSLTPROC_FLAGS) --path $(builddir) \
#	http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl

MAN_IN_FILES = \
	$(man8_MANS:.8=.xml) \
	$(man5_MANS:.5=.xml) \
	$(man1_MANS:.1=.xml) \
	$(NULL)

all: all-am

.SUFFIXES:
$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am $(top_srcdir)/build/gtk-doc.make $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
	        && { if test -f $@; then exit 0; else break; fi; }; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc/manual/Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --foreign doc/manual/Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;
$(top_srcdir)/build/gtk-doc.make $(am__empty):

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure:  $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs
install-man1: $(man1_MANS)
	@$(NORMAL_INSTALL)
	@list1='$(man1_MANS)'; \
	list2=''; \
	test -n "$(man1dir)" \
	  && test -n "`echo $$list1$$list2`" \
	  || exit 0; \
	echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
	$(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
	{ for i in $$list1; do echo "$$i"; done;  \
	if test -n "$$list2"; then \
	  for i in $$list2; do echo "$$i"; done \
	    | sed -n '/\.1[a-z]*$$/p'; \
	fi; \
	} | while read p; do \
	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; echo "$$p"; \
	done | \
	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
	sed 'N;N;s,\n, ,g' | { \
	list=; while read file base inst; do \
	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
	  fi; \
	done; \
	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
	while read files; do \
	  test -z "$$files" || { \
	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
	done; }

uninstall-man1:
	@$(NORMAL_UNINSTALL)
	@list='$(man1_MANS)'; test -n "$(man1dir)" || exit 0; \
	files=`{ for i in $$list; do echo "$$i"; done; \
	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
	dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
install-man5: $(man5_MANS)
	@$(NORMAL_INSTALL)
	@list1='$(man5_MANS)'; \
	list2=''; \
	test -n "$(man5dir)" \
	  && test -n "`echo $$list1$$list2`" \
	  || exit 0; \
	echo " $(MKDIR_P) '$(DESTDIR)$(man5dir)'"; \
	$(MKDIR_P) "$(DESTDIR)$(man5dir)" || exit 1; \
	{ for i in $$list1; do echo "$$i"; done;  \
	if test -n "$$list2"; then \
	  for i in $$list2; do echo "$$i"; done \
	    | sed -n '/\.5[a-z]*$$/p'; \
	fi; \
	} | while read p; do \
	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; echo "$$p"; \
	done | \
	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^5][0-9a-z]*$$,5,;x' \
	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
	sed 'N;N;s,\n, ,g' | { \
	list=; while read file base inst; do \
	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man5dir)/$$inst'"; \
	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man5dir)/$$inst" || exit $$?; \
	  fi; \
	done; \
	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
	while read files; do \
	  test -z "$$files" || { \
	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man5dir)'"; \
	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man5dir)" || exit $$?; }; \
	done; }

uninstall-man5:
	@$(NORMAL_UNINSTALL)
	@list='$(man5_MANS)'; test -n "$(man5dir)" || exit 0; \
	files=`{ for i in $$list; do echo "$$i"; done; \
	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^5][0-9a-z]*$$,5,;x' \
	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
	dir='$(DESTDIR)$(man5dir)'; $(am__uninstall_files_from_dir)
install-man8: $(man8_MANS)
	@$(NORMAL_INSTALL)
	@list1='$(man8_MANS)'; \
	list2=''; \
	test -n "$(man8dir)" \
	  && test -n "`echo $$list1$$list2`" \
	  || exit 0; \
	echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
	$(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
	{ for i in $$list1; do echo "$$i"; done;  \
	if test -n "$$list2"; then \
	  for i in $$list2; do echo "$$i"; done \
	    | sed -n '/\.8[a-z]*$$/p'; \
	fi; \
	} | while read p; do \
	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; echo "$$p"; \
	done | \
	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
	sed 'N;N;s,\n, ,g' | { \
	list=; while read file base inst; do \
	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
	  fi; \
	done; \
	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
	while read files; do \
	  test -z "$$files" || { \
	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
	done; }

uninstall-man8:
	@$(NORMAL_UNINSTALL)
	@list='$(man8_MANS)'; test -n "$(man8dir)" || exit 0; \
	files=`{ for i in $$list; do echo "$$i"; done; \
	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
	dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
tags TAGS:

ctags CTAGS:

cscope cscopelist:


distdir: $(DISTFILES)
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d "$(distdir)/$$file"; then \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
	  else \
	    test -f "$(distdir)/$$file" \
	    || cp -p $$d/$$file "$(distdir)/$$file" \
	    || exit 1; \
	  fi; \
	done
	$(MAKE) $(AM_MAKEFLAGS) \
	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
	  dist-hook
check-am: all-am
check: check-am
all-am: Makefile $(MANS) all-local
installdirs:
	for dir in "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(man5dir)" "$(DESTDIR)$(man8dir)"; do \
	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
	done
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	if test -z '$(STRIP)'; then \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	      install; \
	else \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
	fi
mostlyclean-generic:

clean-generic:
	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-am

clean-am: clean-generic clean-libtool clean-local mostlyclean-am

distclean: distclean-am
	-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-local

dvi: dvi-am

dvi-am:

html: html-am

html-am:

info: info-am

info-am:

install-data-am: install-data-local install-man

install-dvi: install-dvi-am

install-dvi-am:

install-exec-am:

install-html: install-html-am

install-html-am:

install-info: install-info-am

install-info-am:

install-man: install-man1 install-man5 install-man8

install-pdf: install-pdf-am

install-pdf-am:

install-ps: install-ps-am

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-am
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic \
	maintainer-clean-local

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

pdf: pdf-am

pdf-am:

ps: ps-am

ps-am:

uninstall-am: uninstall-local uninstall-man

uninstall-man: uninstall-man1 uninstall-man5 uninstall-man8

.MAKE: install-am install-strip

.PHONY: all all-am all-local check check-am clean clean-generic \
	clean-libtool clean-local cscopelist-am ctags-am dist-hook \
	distclean distclean-generic distclean-libtool distclean-local \
	distdir dvi dvi-am html html-am info info-am install \
	install-am install-data install-data-am install-data-local \
	install-dvi install-dvi-am install-exec install-exec-am \
	install-html install-html-am install-info install-info-am \
	install-man install-man1 install-man5 install-man8 install-pdf \
	install-pdf-am install-ps install-ps-am install-strip \
	installcheck installcheck-am installdirs maintainer-clean \
	maintainer-clean-generic maintainer-clean-local mostlyclean \
	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
	tags-am uninstall uninstall-am uninstall-local uninstall-man \
	uninstall-man1 uninstall-man5 uninstall-man8

.PRECIOUS: Makefile


# Hacks around gtk-doc brokenness for out of tree builds
$(builddir)/p11-kit-sections.txt: $(srcdir)/p11-kit-sections.txt
	cp $(srcdir)/p11-kit-sections.txt $(builddir)/p11-kit-sections.txt
$(builddir)/p11-kit-overrides.txt: $(srcdir)/p11-kit-overrides.txt
	cp $(srcdir)/p11-kit-overrides.txt $(builddir)/p11-kit-overrides.txt

# Generate our files with variables
sysdir.xml:
	$(AM_V_GEN) echo -n '$(p11_system_config)' > "$@"
userdir.xml:
	$(AM_V_GEN) echo -n '$(p11_user_config)' > "$@"
version.xml:
	$(AM_V_GEN) echo -n '$(VERSION)' > "$@"

#all-local: $(HTML_BUILD_STAMP) $(PDF_BUILD_STAMP)
all-local:

docs: $(HTML_BUILD_STAMP) $(PDF_BUILD_STAMP)

$(REPORT_FILES): sgml-build.stamp

#### setup ####

setup-build.stamp:
	-@if test "$(abs_srcdir)" != "$(abs_builddir)" ; then \
	    echo '  DOC   Preparing build'; \
	    files=`echo $(SETUP_FILES) $(expand_content_files) $(DOC_MODULE).types`; \
	    if test "x$$files" != "x" ; then \
	        for file in $$files ; do \
	            test -f $(abs_srcdir)/$$file && \
	                cp -pu $(abs_srcdir)/$$file $(abs_builddir)/ || true; \
	        done; \
	    fi; \
	fi
	@touch setup-build.stamp

#### scan ####

scan-build.stamp: $(HFILE_GLOB) $(CFILE_GLOB)
	@echo '  DOC   Scanning header files'
	@_source_dir='' ; \
	for i in $(DOC_SOURCE_DIR) ; do \
	    _source_dir="$${_source_dir} --source-dir=$$i" ; \
	done ; \
	gtkdoc-scan --module=$(DOC_MODULE) --ignore-headers="$(IGNORE_HFILES)" $${_source_dir} $(SCAN_OPTIONS) $(EXTRA_HFILES)
	@if grep -l '^..*$$' $(DOC_MODULE).types > /dev/null 2>&1 ; then \
	    echo "  DOC   Introspecting gobjects"; \
	    scanobj_options=""; \
	    gtkdoc-scangobj 2>&1 --help | grep  >/dev/null "\-\-verbose"; \
	    if test "$(?)" = "0"; then \
	        if test "x$(V)" = "x1"; then \
	            scanobj_options="--verbose"; \
	        fi; \
	    fi; \
	    CC="$(GTKDOC_CC)" LD="$(GTKDOC_LD)" RUN="$(GTKDOC_RUN)" CFLAGS="$(GTKDOC_CFLAGS) $(CFLAGS)" LDFLAGS="$(GTKDOC_LIBS) $(LDFLAGS)" \
	    gtkdoc-scangobj $(SCANGOBJ_OPTIONS) $$scanobj_options --module=$(DOC_MODULE); \
	else \
	    for i in $(SCANOBJ_FILES) ; do \
	        test -f $$i || touch $$i ; \
	    done \
	fi
	@touch scan-build.stamp

$(DOC_MODULE)-decl.txt $(SCANOBJ_FILES): scan-build.stamp
	@true

#### xml ####

sgml-build.stamp: setup-build.stamp $(DOC_MODULE)-decl.txt $(SCANOBJ_FILES) $(DOC_MODULE)-sections.txt $(DOC_MODULE)-overrides.txt $(expand_content_files)
	@echo '  DOC   Building XML'
	@_source_dir='' ; \
	for i in $(DOC_SOURCE_DIR) ; do \
	    _source_dir="$${_source_dir} --source-dir=$$i" ; \
	done ; \
	gtkdoc-mkdb --module=$(DOC_MODULE) --output-format=xml --expand-content-files="$(expand_content_files)" --main-sgml-file=$(DOC_MAIN_SGML_FILE) $${_source_dir} $(MKDB_OPTIONS)
	@touch sgml-build.stamp

sgml.stamp: sgml-build.stamp
	@true

#### html ####

html-build.stamp: sgml.stamp $(DOC_MAIN_SGML_FILE) $(content_files) $(srcdir)/style.css
	@echo '  DOC   Building HTML'
	@rm -rf html
	@mkdir html
	@mkhtml_options=""; \
	gtkdoc-mkhtml 2>&1 --help | grep  >/dev/null "\-\-verbose"; \
	if test "$(?)" = "0"; then \
	  if test "x$(V)" = "x1"; then \
	    mkhtml_options="$$mkhtml_options --verbose"; \
	  fi; \
	fi; \
	gtkdoc-mkhtml 2>&1 --help | grep  >/dev/null "\-\-path"; \
	if test "$(?)" = "0"; then \
	  mkhtml_options="$$mkhtml_options --path=\"$(abs_srcdir)\""; \
	fi; \
	cd html && gtkdoc-mkhtml $$mkhtml_options $(MKHTML_OPTIONS) $(DOC_MODULE) ../$(DOC_MAIN_SGML_FILE)
	-@test "x$(HTML_IMAGES)" = "x" || \
	for file in $(HTML_IMAGES) ; do \
	  if test -f $(abs_srcdir)/$$file ; then \
	    cp $(abs_srcdir)/$$file $(abs_builddir)/html; \
	  fi; \
	  if test -f $(abs_builddir)/$$file ; then \
	    cp $(abs_builddir)/$$file $(abs_builddir)/html; \
	  fi; \
	done;
	@echo '  DOC   Fixing cross-references'
	@gtkdoc-fixxref --module=$(DOC_MODULE) --module-dir=html --html-dir=$(HTML_DIR) $(FIXXREF_OPTIONS)
	@mv $(builddir)/html/style.css $(builddir)/html/gtk-doc.css
	@cp $(srcdir)/style.css $(builddir)/html/style.css
	@touch html-build.stamp

#### pdf ####

pdf-build.stamp: sgml.stamp $(DOC_MAIN_SGML_FILE) $(content_files)
	@echo '  DOC   Building PDF'
	@rm -f $(DOC_MODULE).pdf
	@mkpdf_options=""; \
	gtkdoc-mkpdf 2>&1 --help | grep  >/dev/null "\-\-verbose"; \
	if test "$(?)" = "0"; then \
	  if test "x$(V)" = "x1"; then \
	    mkpdf_options="$$mkpdf_options --verbose"; \
	  fi; \
	fi; \
	if test "x$(HTML_IMAGES)" != "x"; then \
	  for img in $(HTML_IMAGES); do \
	    part=`dirname $$img`; \
	    echo $$mkpdf_options | grep >/dev/null "\-\-imgdir=$$part "; \
	    if test $$? != 0; then \
	      mkpdf_options="$$mkpdf_options --imgdir=$$part"; \
	    fi; \
	  done; \
	fi; \
	gtkdoc-mkpdf --path="$(abs_srcdir)" $$mkpdf_options $(DOC_MODULE) $(DOC_MAIN_SGML_FILE) $(MKPDF_OPTIONS)
	@touch pdf-build.stamp

##############

clean-local:
	@rm -f *~ *.bak
	@rm -rf .libs

distclean-local:
	@rm -rf xml html $(REPORT_FILES) $(DOC_MODULE).pdf \
	    $(DOC_MODULE)-decl-list.txt $(DOC_MODULE)-decl.txt
	@if test "$(abs_srcdir)" != "$(abs_builddir)" ; then \
	    rm -f $(SETUP_FILES) $(expand_content_files) $(DOC_MODULE).types; \
	fi

maintainer-clean-local: clean
	@rm -rf xml html

install-data-local:
	@installfiles=`echo $(builddir)/html/*`; \
	if test "$$installfiles" = '$(builddir)/html/*'; \
	then echo 1>&2 'Nothing to install' ; \
	else \
	  if test -n "$(DOC_MODULE_VERSION)"; then \
	    installdir="$(DESTDIR)$(TARGET_DIR)-$(DOC_MODULE_VERSION)"; \
	  else \
	    installdir="$(DESTDIR)$(TARGET_DIR)"; \
	  fi; \
	  $(mkinstalldirs) $${installdir} ; \
	  for i in $$installfiles; do \
	    echo ' $(INSTALL_DATA) '$$i ; \
	    $(INSTALL_DATA) $$i $${installdir}; \
	  done; \
	  if test -n "$(DOC_MODULE_VERSION)"; then \
	    mv -f $${installdir}/$(DOC_MODULE).devhelp2 \
	      $${installdir}/$(DOC_MODULE)-$(DOC_MODULE_VERSION).devhelp2; \
	  fi; \
	  $(GTKDOC_REBASE) --relative --dest-dir=$(DESTDIR) --html-dir=$${installdir}; \
	fi

uninstall-local:
	@if test -n "$(DOC_MODULE_VERSION)"; then \
	  installdir="$(DESTDIR)$(TARGET_DIR)-$(DOC_MODULE_VERSION)"; \
	else \
	  installdir="$(DESTDIR)$(TARGET_DIR)"; \
	fi; \
	rm -rf $${installdir}

#
# Require gtk-doc when making dist
#
#dist-check-gtkdoc:
dist-check-gtkdoc:
	@echo "*** gtk-doc must be installed and --enable-doc in order to make dist"
	@false

dist-hook: dist-check-gtkdoc dist-hook-local
	@mkdir $(distdir)/html
	@cp ./html/* $(distdir)/html
	@-cp ./$(DOC_MODULE).pdf $(distdir)/
	@-cp ./$(DOC_MODULE).types $(distdir)/
	@-cp ./$(DOC_MODULE)-sections.txt $(distdir)/
	@cd $(distdir) && rm -f $(DISTCLEANFILES)
	@$(GTKDOC_REBASE) --online --relative --html-dir=$(distdir)/html

.PHONY : dist-hook-local docs

.NOTPARALLEL:

#trust.1: trust.xml $(generate_files)
#	$(AM_V_GEN) $(XSLTPROC_MAN) $<
#pkcs11.conf.5: pkcs11.conf.xml $(generate_files)
#	$(AM_V_GEN) $(XSLTPROC_MAN) $<
#p11-kit.8: p11-kit.xml $(generate_files)
#	$(AM_V_GEN) $(XSLTPROC_MAN) $<

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
