|
Point Cloud Library (PCL)
1.5.1
|
00001 /* 00002 * Software License Agreement (BSD License) 00003 * 00004 * Point Cloud Library (PCL) - www.pointclouds.org 00005 * Copyright (c) 2010-2011, Willow Garage, Inc. 00006 * 00007 * All rights reserved. 00008 * 00009 * Redistribution and use in source and binary forms, with or without 00010 * modification, are permitted provided that the following conditions 00011 * are met: 00012 * 00013 * * Redistributions of source code must retain the above copyright 00014 * notice, this list of conditions and the following disclaimer. 00015 * * Redistributions in binary form must reproduce the above 00016 * copyright notice, this list of conditions and the following 00017 * disclaimer in the documentation and/or other materials provided 00018 * with the distribution. 00019 * * Neither the name of Willow Garage, Inc. nor the names of its 00020 * contributors may be used to endorse or promote products derived 00021 * from this software without specific prior written permission. 00022 * 00023 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 00024 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 00025 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS 00026 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE 00027 * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, 00028 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, 00029 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 00030 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 00031 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 00032 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN 00033 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 00034 * POSSIBILITY OF SUCH DAMAGE. 00035 * 00036 * $Id: icp.hpp 4702 2012-02-23 09:39:33Z gedikli $ 00037 * 00038 */ 00039 00040 #include <boost/unordered_map.hpp> 00041 00043 template <typename PointSource, typename PointTarget> void 00044 pcl::IterativeClosestPoint<PointSource, PointTarget>::computeTransformation (PointCloudSource &output, const Eigen::Matrix4f &guess) 00045 { 00046 // Allocate enough space to hold the results 00047 std::vector<int> nn_indices (1); 00048 std::vector<float> nn_dists (1); 00049 00050 // Point cloud containing the correspondences of each point in <input, indices> 00051 PointCloudTarget input_corresp; 00052 input_corresp.points.resize (indices_->size ()); 00053 00054 nr_iterations_ = 0; 00055 converged_ = false; 00056 double dist_threshold = corr_dist_threshold_ * corr_dist_threshold_; 00057 00058 // If the guessed transformation is non identity 00059 if (guess != Eigen::Matrix4f::Identity ()) 00060 { 00061 // Initialise final transformation to the guessed one 00062 final_transformation_ = guess; 00063 // Apply guessed transformation prior to search for neighbours 00064 transformPointCloud (output, output, guess); 00065 } 00066 00067 // Resize the vector of distances between correspondences 00068 std::vector<float> previous_correspondence_distances (indices_->size ()); 00069 correspondence_distances_.resize (indices_->size ()); 00070 00071 while (!converged_) // repeat until convergence 00072 { 00073 // Save the previously estimated transformation 00074 previous_transformation_ = transformation_; 00075 // And the previous set of distances 00076 previous_correspondence_distances = correspondence_distances_; 00077 00078 int cnt = 0; 00079 std::vector<int> source_indices (indices_->size ()); 00080 std::vector<int> target_indices (indices_->size ()); 00081 00082 // Iterating over the entire index vector and find all correspondences 00083 for (size_t idx = 0; idx < indices_->size (); ++idx) 00084 { 00085 if (!this->searchForNeighbors (output, (*indices_)[idx], nn_indices, nn_dists)) 00086 { 00087 PCL_ERROR ("[pcl::%s::computeTransformation] Unable to find a nearest neighbor in the target dataset for point %d in the source!\n", getClassName ().c_str (), (*indices_)[idx]); 00088 return; 00089 } 00090 00091 // Check if the distance to the nearest neighbor is smaller than the user imposed threshold 00092 if (nn_dists[0] < dist_threshold) 00093 { 00094 source_indices[cnt] = (*indices_)[idx]; 00095 target_indices[cnt] = nn_indices[0]; 00096 cnt++; 00097 } 00098 00099 // Save the nn_dists[0] to a global vector of distances 00100 correspondence_distances_[(*indices_)[idx]] = std::min (nn_dists[0], (float)dist_threshold); 00101 } 00102 if (cnt < min_number_correspondences_) 00103 { 00104 PCL_ERROR ("[pcl::%s::computeTransformation] Not enough correspondences found. Relax your threshold parameters.\n", getClassName ().c_str ()); 00105 converged_ = false; 00106 return; 00107 } 00108 00109 // Resize to the actual number of valid correspondences 00110 source_indices.resize (cnt); target_indices.resize (cnt); 00111 00112 std::vector<int> source_indices_good; 00113 std::vector<int> target_indices_good; 00114 { 00115 // From the set of correspondences found, attempt to remove outliers 00116 // Create the registration model 00117 typedef typename SampleConsensusModelRegistration<PointSource>::Ptr SampleConsensusModelRegistrationPtr; 00118 SampleConsensusModelRegistrationPtr model; 00119 model.reset (new SampleConsensusModelRegistration<PointSource> (output.makeShared (), source_indices)); 00120 // Pass the target_indices 00121 model->setInputTarget (target_, target_indices); 00122 // Create a RANSAC model 00123 RandomSampleConsensus<PointSource> sac (model, inlier_threshold_); 00124 sac.setMaxIterations (ransac_iterations_); 00125 00126 // Compute the set of inliers 00127 if (!sac.computeModel ()) 00128 { 00129 source_indices_good = source_indices; 00130 target_indices_good = target_indices; 00131 } 00132 else 00133 { 00134 std::vector<int> inliers; 00135 // Get the inliers 00136 sac.getInliers (inliers); 00137 source_indices_good.resize (inliers.size ()); 00138 target_indices_good.resize (inliers.size ()); 00139 00140 boost::unordered_map<int, int> source_to_target; 00141 for (unsigned int i = 0; i < source_indices.size(); ++i) 00142 source_to_target[source_indices[i]] = target_indices[i]; 00143 00144 // Copy just the inliers 00145 std::copy(inliers.begin(), inliers.end(), source_indices_good.begin()); 00146 for (size_t i = 0; i < inliers.size (); ++i) 00147 target_indices_good[i] = source_to_target[inliers[i]]; 00148 } 00149 } 00150 00151 // Check whether we have enough correspondences 00152 cnt = (int)source_indices_good.size (); 00153 if (cnt < min_number_correspondences_) 00154 { 00155 PCL_ERROR ("[pcl::%s::computeTransformation] Not enough correspondences found. Relax your threshold parameters.\n", getClassName ().c_str ()); 00156 converged_ = false; 00157 return; 00158 } 00159 00160 PCL_DEBUG ("[pcl::%s::computeTransformation] Number of correspondences %d [%f%%] out of %lu points [100.0%%], RANSAC rejected: %lu [%f%%].\n", getClassName ().c_str (), cnt, (cnt * 100.0) / indices_->size (), (unsigned long)indices_->size (), (unsigned long)source_indices.size () - cnt, (source_indices.size () - cnt) * 100.0 / source_indices.size ()); 00161 00162 // Estimate the transform 00163 //rigid_transformation_estimation_(output, source_indices_good, *target_, target_indices_good, transformation_); 00164 transformation_estimation_->estimateRigidTransformation (output, source_indices_good, *target_, target_indices_good, transformation_); 00165 00166 // Tranform the data 00167 transformPointCloud (output, output, transformation_); 00168 00169 // Obtain the final transformation 00170 final_transformation_ = transformation_ * final_transformation_; 00171 00172 nr_iterations_++; 00173 00174 // Update the vizualization of icp convergence 00175 if (update_visualizer_ != 0) 00176 update_visualizer_(output, source_indices_good, *target_, target_indices_good ); 00177 00178 // Various/Different convergence termination criteria 00179 // 1. Number of iterations has reached the maximum user imposed number of iterations (via 00180 // setMaximumIterations) 00181 // 2. The epsilon (difference) between the previous transformation and the current estimated transformation 00182 // is smaller than an user imposed value (via setTransformationEpsilon) 00183 // 3. The sum of Euclidean squared errors is smaller than a user defined threshold (via 00184 // setEuclideanFitnessEpsilon) 00185 00186 if (nr_iterations_ >= max_iterations_ || 00187 fabs ((transformation_ - previous_transformation_).sum ()) < transformation_epsilon_ || 00188 fabs (this->getFitnessScore (correspondence_distances_, previous_correspondence_distances)) <= euclidean_fitness_epsilon_ 00189 ) 00190 { 00191 converged_ = true; 00192 PCL_DEBUG ("[pcl::%s::computeTransformation] Convergence reached. Number of iterations: %d out of %d. Transformation difference: %f\n", 00193 getClassName ().c_str (), nr_iterations_, max_iterations_, fabs ((transformation_ - previous_transformation_).sum ())); 00194 00195 PCL_DEBUG ("nr_iterations_ (%d) >= max_iterations_ (%d)\n", nr_iterations_, max_iterations_); 00196 PCL_DEBUG ("fabs ((transformation_ - previous_transformation_).sum ()) (%f) < transformation_epsilon_ (%f)\n", 00197 fabs ((transformation_ - previous_transformation_).sum ()), transformation_epsilon_); 00198 PCL_DEBUG ("fabs (getFitnessScore (correspondence_distances_, previous_correspondence_distances)) (%f) <= euclidean_fitness_epsilon_ (%f)\n", 00199 fabs (this->getFitnessScore (correspondence_distances_, previous_correspondence_distances)), 00200 euclidean_fitness_epsilon_); 00201 00202 } 00203 } 00204 } 00205
1.8.0