multi_usrp_oscope::app_flow_graph Class Reference

List of all members.

Public Member Functions
def	__init__
def	add_to_scope
def	set_freq
	Set the center frequency we're interested in for all channels, on all rx daughterboards on MASTER and SLAVE.
def	set_freq_chan0
	Set the center frequency we're interested in for rx chan 0 only on MASTER and SLAVE.
def	set_gain
def	set_gain_chan0
def	onIdle
def	sync_usrps
Public Attributes
	frame
	panel
	show_debug_info
	multi
	um
	us
	subdevm
	subdevs
	scope
	sink_count
	unsynced
	myform

---

Member Function Documentation

def multi_usrp_oscope::app_flow_graph::__init__	(		self,
			frame,
			panel,
			vbox,
			argv
	)

def multi_usrp_oscope::app_flow_graph::add_to_scope	(		self,
			source_c,
			show_q
	)

def multi_usrp_oscope::app_flow_graph::onIdle	(		self,
			evt
	)

def multi_usrp_oscope::app_flow_graph::set_freq	(		self,
			target_freq,
			sync = True
	)

Set the center frequency we're interested in for all channels, on all rx daughterboards on MASTER and SLAVE.

Parameters:

	target_freq,:	frequency in Hz
	sync,:	sync the usrps after setting the freqs (this will clear any phase differences in the DDCS) : bool

Tuning is a two step process. First we ask the front-end to tune as close to the desired frequency as it can. Then we use the result of that operation and our target_frequency to determine the value for the digital down converter.

def multi_usrp_oscope::app_flow_graph::set_freq_chan0	(		self,
			target_freq,
			sync = True
	)

Set the center frequency we're interested in for rx chan 0 only on MASTER and SLAVE.

Parameters:

	target_freq,:	frequency in Hz
	sync,:	sync the usrps after setting the freqs (this will clear any phase differences in the DDCS) : bool

Tuning is a two step process. First we ask the front-end to tune as close to the desired frequency as it can. Then we use the result of that operation and our target_frequency to determine the value for the digital down converter.

def multi_usrp_oscope::app_flow_graph::set_gain	(		self,
			gain
	)

def multi_usrp_oscope::app_flow_graph::set_gain_chan0	(		self,
			gain
	)

def multi_usrp_oscope::app_flow_graph::sync_usrps

(

self

)

---

Member Data Documentation

multi_usrp_oscope::app_flow_graph::frame

multi_usrp_oscope::app_flow_graph::multi

multi_usrp_oscope::app_flow_graph::myform

multi_usrp_oscope::app_flow_graph::panel

multi_usrp_oscope::app_flow_graph::scope

multi_usrp_oscope::app_flow_graph::show_debug_info

multi_usrp_oscope::app_flow_graph::sink_count

multi_usrp_oscope::app_flow_graph::subdevm

multi_usrp_oscope::app_flow_graph::subdevs

multi_usrp_oscope::app_flow_graph::um

multi_usrp_oscope::app_flow_graph::unsynced

multi_usrp_oscope::app_flow_graph::us

---

The documentation for this class was generated from the following file:

• multi_usrp_oscope.py